CITROEN DS3 - Page 206

Changingawheel
Procedureforchangingafaultywheelforthesparewheelusingthetoolsprovidedwiththevehicle.
Thetoolsareinstalledinthebootunderthe
floor.
Togainaccesstothem:
F open the boot,
F liftthebootcarpetbypullingthestrap
upwards,
F removethepolystyrenestoragebox,
F unclipandremovetheboxcontainingthe
tools.
Access to the tools
List of tools
Wheel with trim
When removing the wheel, first
detachthetrimusingthewheelbrace1
pullingatthevalvepassagehole.
When refitting the wheel, refit the
trimstartingbyplacingitscut-outatthe
valveandpressarounditsedgewith
thepalmofyourhand.
1. Wheelbrace.
 Forremovingthewheeltrimandremoving
thewheelfixingbolts.
2. Jackwithintegralhandle.
 Forraisingthevehicle.
3. "Boltcover"tool.
 Forremovingtheboltprotectors(covers)
onalloywheels.
4. Socketforthesecuritywheelbolts(located
intheglovebox).
 Foradaptingthewheelbracetothespecial
securitywheelbolts(ifyourvehicleisfitted
withthem).
All of these tools are specific to your
vehicle.Donotusethemforother
purposes.
Neveruseajackotherthanthe
onelistedforthevehiclebythe
manufacturer.Ifthevehicledoesnot
haveone,contactaCITROËNdealer
oraqualifiedworkshoptoobtainajack
specifiedbythemanufacturer.