EasyManua.ls Logo

Citronic PL720 - User Manual

Citronic PL720
4 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
PL720, PL1080
1U STEREO POWER AMPLIFIERS
Order ref: 172.111UK, 172.112UK
User Manual
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
Question and Answer IconNeed help?

Do you have a question about the Citronic PL720 and is the answer not in the manual?

Summary

Introduction and Safety

User Guidance and Warnings

Essential advice on safe operation, handling, placement, and cleaning to prevent damage and ensure longevity.

Panel Component Identification

Overview of front panel controls (power, gain, LEDs) and rear panel connections (inputs, outputs, switches).

Setup and Operation Modes

Initial Setup

Instructions for checking mains voltage, selector setting, and ensuring adequate ventilation before operation.

Stereo Mode

Guide for connecting speakers and inputs for stereo operation, including impedance considerations.

Parallel Mode

Details on connecting speakers for mono output using Channel A input and control.

Bridge Mode

Explanation of combining channels for higher mono output power, including load limitations.

Ground Lift Function

How to use the Ground Lift switch to isolate signal ground from mains earth for noise reduction.

Operation and Specifications

Basic Operation

Step-by-step guide for powering on, adjusting volume, and monitoring signal/clip indicators.

Technical Specifications

Detailed technical data including power output, frequency response, THD, dimensions, and weight.

Citronic PL720 Specifications

General IconGeneral
Frequency Response20Hz - 20kHz
Signal to Noise Ratio>95dB
Power Supply230Vac, 50Hz
Channels2
Input Impedance20k Ohms balanced
ProtectionShort circuit, Overload, DC, Thermal

Related product manuals