Do you have a question about the Citronic PLX2000 and is the answer not in the manual?
Channels | 2 |
---|---|
Frequency Response | 20 Hz - 20 kHz |
Input Sensitivity | 0.775 V |
Rack Mountable | Yes |
Input Impedance | 20 kOhm |
Input Connectors | XLR, Jack |
Output Connectors | Speakon, Binding Post |
Protection | Short Circuit, Overload |
Cooling | Fan |
Power Supply | 230V, 50Hz |
Output Power (4 Ohms) | 2 x 1000W RMS |
General introduction to the PLX amplifier series, its design, and user manual purpose.
Crucial safety warnings regarding fire, electric shock, moisture, and user servicing.
Essential safety checks for mains voltage, speaker leads, and load impedance.
Recommendations for amplifier placement, ventilation, and rack-mounting.
Instructions on how to clean the amplifier casing and ventilation grilles.
Detailed overview of the front panel controls, indicators, and their functions.
Comprehensive guide to rear panel connections, switches, and inputs/outputs.
Guidance on selecting and configuring STEREO, PARALLEL, and BRIDGE modes.
Explanation of the GROUND LIFT switch and input SENSITIVITY adjustments.
Procedure for safely powering on the amplifier and understanding its soft-start function.
Detailed technical data for PLX2000, PLX2800, and PLX3600 amplifier models.
Guide to diagnosing and resolving common amplifier operational problems.