Need help?Do you have a question about the Citronic PPX900 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Output Power (4 Ohms) | 450W per channel |
| Output Power (8 Ohms) | 300W per channel |
| Frequency Response | 10Hz - 50kHz |
| Input Sensitivity | 0.775V |
| Signal to Noise Ratio | >100dB |
| Power Supply | 230V AC, 50Hz |
| Input Impedance | 20k Ohms |
| THD | <0.05% |
| Protection | Short circuit, DC, overload, thermal |
| Inputs | XLR, 6.3mm jack |
| Slew Rate | 20V/uS |
Includes detent volume, stereo/parallel/bridged modes, clip limiters, input sensitivities, ground lift, and various outputs.
Features dual speed fans, soft start, noise-free operation, DC/thermal/short circuit protection, and current limiter.
Active, Signal, Limit, and Protection LEDs indicate operational status and potential issues.
Employs a roadworthy, rugged 2U steel chassis with modular construction for easy servicing.
Cautionary symbols and text warn against opening the unit and indicate risk of electric shock.
Crucial precautions for safe operation, including water avoidance, stable placement, volume limits, and ventilation.
Instructions for carefully opening the shipping carton, checking for damage, and saving packing materials.
Guidance on mounting the amplifier in a 19-inch rack, including support for mobile use.
Emphasis on proper ventilation, avoiding heat sources and dust, and periodic cleaning of internal dust.
Details the power switch, LEDs (Power, Signal, Clip, Protect), and level controls on the front panel.
Covers rear panel elements like fan, fuse, power connector, ground lift, outputs, mode switch, and inputs.
Details stereo and bridge-mono power ratings (W) for PPX300, PPX600, and PPX900 models.
Includes input sensitivity, impedance, frequency response, distortion, S/N ratio, protections, controls, and indicators.
Covers power supply voltage, fuses, dimensions (mm), and weight (kg) for each model.
To Next Page
