CKD PPX Series User Manual

RUN MODE screen
To HYS MODE (hysteresis mode)
R01 type (-100.0 to 100.0kPa)
Start from the mode when power turned ON (RUN MODE).
If RUN MODE is not selected, hold down the "MODE" key for
several seconds to display the RUN MODE state.
Suction conrmation
(Note 1): This is an example of setting from default setting.
(Note 2): If the setting conditions are unknown, operate <reset setting> in PRO MODE, and reset to default before using.
HYS MODE (hysteresis mode)
Example of setting operation per application
Menu setting mode screen
RUN MODE screen
Suction + vacuum break conrmation
RUN MODE screen
Menu setting mode screen
RUN MODE screen
MODE
Auto
Auto
Auto Auto
Auto
Auto
Auto
Auto
PPX Series
How to operate
Comparison output 2
OFF
Comparison output 1
HYS mode
0kPa
Suction confirmation
-100kPa
ON
OFF
Lo-1
[-70.0]
Hi-1
[-60.0]
MODE
Hold down for 2 s.
MODEMODEMODEMODE
Hold down for 2 s. Press once.Press once.Press once.
MODEMODEMODE
Press once.
Press once.
Press once.
Setting completion
MODE
Hold down for 2 s.
MODE
Hold down for 2 s.
MODE
Press once.
Press twice.
MODE
Press once. Press twice.
Press once.
Press once.
MODE
Press once.
MODE
Press once.
Setting completion
MODE
MODE
Press once.
Comparison output 2
HYS mode
Comparison output 1
HYS mode
Vacuum break
conrmation
Suction conrmation
ON
OFF
ON
OFF
Hi-1
[-60.0]
Lo-1
[-70.0]
0kPa Hi-2
[80.0]
Lo-2
[70.0]
Press to set
the target.
Press
to set
the target.
Press to set
the target.
Press
to set
the target.
Press
to set
the target.
Press
to set
the target.
18

CKD PPX Series Specifications

General

Brand	CKD
Model	PPX Series
Category	Accessories
Language	English