Claas CELTIS 446 User Manual

CELTIS – 10.2007 – GB
A.6
ADJUSTMENT OR MAINTENANCE -
REPAIRS
Only carry out operations well within your capabilities. A
number of simple adjustments are described in the manual
(clutch and brake free travel, etc.). Never attempt to work on
your tractor unless you have perfectly understood the
procedure and have all the basic equipment required.
Special equipment is required to remove or install major
components (the cab, engine, transmission, front axle);
this equipment represents the only guarantee of safe
working conditions and successful repair.
The CLAAS network is at your disposal for all this work. It has
the approved special tooling, the skills required and genuine
CLAAS parts. If you have any doubts at all, call in your
CLAAS agent.
001hsn08

Claas CELTIS 446 Specifications

General

Displacement	4.5 L
Transmission	ZF T-7220
Max. Speed	40 km/h
Engine type	4-cylinder diesel
Hydraulic Pump Flow	60 lpm
Wheelbase	2, 500 mm
Type	Standard tractor
Lift Capacity	5, 000 kg