Claas CELTIS 446 User Manual

CELTIS – 10.2007 – GB
C.2
CHARACTERISTICS
BULBS
TOWING SOCKET
TRAILER/IMPLEMENT LIGHT SOCKET (A)
1- Left direction indicators.
2- Available.
3- Earth.
4- Right direction indicators.
5- Right side lights + number plate light.
6- Brake light.
7- Left side lights.
Note: When using the rear power socket, make sure that the
lights on the implement are in good condition.
ELECTRIC CABINET POWER SOCKET
(B)
E.g. sprayers, drills, etc.
- Voltage: 12 volts.
- Maximum current terminal 1 : 25 amps.
- Maximum current terminal 3 : 5 amps.
- Terminal 2 : Earth.
EVENT COUNTER CONNECTOR (C) FOR THE ON-BOARD
COMPUTER
See use of the on-board computer in chapter I "On-board
computer" of this manual.
601bsn06
601bsn07
Designation Power Type
Dipped/ road lights 55 W
H7
Direction indicators 21 W
Front sidelights
5 W
Brake lights
Rear lights
5/21 W
Number plate light
10 W
Working lights
55 W
H3
Rotating beacon 55 W
H1
+
–
1
2
3
+

Claas CELTIS 446 Specifications

General

Displacement	4.5 L
Transmission	ZF T-7220
Max. Speed	40 km/h
Engine type	4-cylinder diesel
Hydraulic Pump Flow	60 lpm
Wheelbase	2, 500 mm
Type	Standard tractor
Lift Capacity	5, 000 kg