1.1.2
RHB ROLLANT 250 / 250 RC - 298 332.0
General
Introduction to the CLAAS REPAIR MANUAL
The CLAAS REPAIR MANUAL is divided into main
groups and subgroups.
Pages and illustrations are numbered consecutively
throughout each main group. The first figure at the
bottom of each page refers to the main group whereas
the second figure following the point indicates the
subgroup; the figure behind the second point indicates
the page number. In each subgroup, the figures and
pages are numbered consecutively, starting at 1.
Where differences between the machine types must
be observed, this is indicated in headings. Where a
service procedure applies to all machines covered by
this book, the machine names are not specifically
given.
When supplements are to be added, the subgroups
are supplemented or exchanged. All supplements are
inserted into the respective main group / subgroup and
the table of contents is updated.
The symbols communicate brief messages when
recurring service procedures are described. Their
meaning is explained at the beginning of this manual.
The section “GENERAL REPAIR INSTRUCTIONS” at
the beginning of this manual contains useful practical
hints. Read and follow these fundamental instructions.
They are the basis for reliable service and durability of
parts after repairs have been carried out.
The description of a particular service procedure
can easily be found by checking the table of
contents of the appropriate main group /
subgroup.
Find manuals at http://best-manuals.com/search?&s=CLA-2983320
To Next Page
Loading...
Need help?
General
