Clabel CT220B User Manual (English)

Questions and Answers:

W
William LoganAug 7, 2025
Why is the print on my Clabel CT220B not clear and pixelated?
- D
  Daniel BarnesAug 7, 2025
  If the print from your Clabel Label Maker appears unclear or pixelated, there could be several reasons. It might be due to a broken needle effect during printing. To check this, print a self-check page to see if the black line appears normal. Also, the selected font might not be clear, so try using a different font in the app and adjust the font size and boldness. Finally, you may need to adjust the print density within the app settings by navigating to Print content > Print > Print settings > Print density.
W
westradaAug 12, 2025
What to do if my Clabel Label Maker is printing garbled content?
- T
  Tracy MurrayAug 13, 2025
  If your Clabel Label Maker is printing garbled content, it's likely that the print mode isn't set correctly. To fix this, check if the printer is in print mode. If not, switch to print mode by pressing and holding the power button and paper feeding button simultaneously for three seconds. The printer will then print a self-test page to confirm the mode.
W
Wesley CastilloAug 18, 2025
How to fix Bluetooth connection failure with Clabel CT220B Label Maker on my phone?
- C
  Crystal VargasAug 18, 2025
  If you're experiencing Bluetooth connection issues between your phone and the Clabel Label Maker, the Bluetooth permission might not be enabled. Please ensure that both Bluetooth permission and location services are turned on in your smartphone's settings.