280-7740-00
ADB340MP/ADB341MP 11
● Quick tuning:
Press and hold the [ ] or [ ] button to
manually tune to the desired frequency.
● Step tuning:
Press the [ ] or [ ] button to manually tune
one step at a time to the desired frequency.
Storing a preset station
A total of 24 preset positions (6-FM1, 6-FM2, 6-
FM3, 6-AM) exists to store individual radio sta-
tions in memory.
Manual memory
1. Select the desired station with seek tuning,
manual tuning or preset tuning.
2. Press the [MEMO] button. “CH” blinks in the
display.
3. Turning the [PRESET] knob either clockwise
or counterclockwise to select the desired pre-
set memory.
4. Press and hold the [MEMO] button for 1 sec-
onds or longer to store that station into pre-
set memory.
Auto store
Auto store selects up to 6 stations and automati-
cally stores them into preset memory.
1. Press the [BND] button and select the desired
band (FM or AM).
2. Press and hold the [SCN] button for 2 sec-
onds or longer. The stations with good recep-
tion are stored automatically to the preset
memory.
Recalling a preset station
Turning the [PRESET] knob either clockwise or coun-
terclockwise to recall the stored radio frequency auto-
matically.
1. Press the [BND] button and select the desired
band (FM1, FM2, FM3 or AM).
2. Turning the [PRESET] knob either clockwise
or counterclockwise to recall the stored sta-
tion.
Radio Operations
Preset scan
Preset scan receives the stations stored in pre-
set memory in order. This function is useful when
searching for a desired station in memory.
1. Press the [SCN] button.
2. When a desired station is tuned in, press the
[SCN] button again to continue receiving that
station.
Note:
• Be careful not to press and hold the [SCN] button
for 2 seconds or longer, otherwise the auto store
function engages and the unit starts storing sta-
tions.
Instant station recall (ISR)
Instant station recall is a special radio preset that
instantly accesses a favorite radio station at a
touch of a button. The ISR function even oper-
ates with the unit in other modes.
● ISR memory
1. Select the station that you wish to store in ISR
memory.
2. Press and hold the [ISR] button for 1 seconds
or longer.
● Recalling a station with ISR
In any mode, press the [ISR] button to turn on
the radio function and tune the selected radio
station. “ISR” appears in the display. Press the
[ISR] button again to return to the previous mode.
ADB340/341009-020.Eng 03.12.17, 0:08 PM11
To Next Page
Loading...
