Clarion PS-3025K-A - User Manual

PS-3025K-A,B
- 1 -
Service Manual
Published by Service Dept.
Printed in Japan
Clarion Co., Ltd.
7-2, Shintoshin, Chuo-ku, Saitama-shi, Saitama 330-0081 Japan
Service Dept.: 7-2, Shintoshin, Chuo-ku, Saitama-shi, Saitama 330-0081 Japan
Tel: +81-48-601-3705 FAX: +81-48-601-3804
298-6536-00
Jan.2008
Model
SUZUKI Automobile Genuine
RDS/FM/MW/LW TUNER CD
COMBI
PS-3025K-A
(Genuine No.39101-80JA1-CZT)
(ID No.CLCC02)
PS-3025K-B
(Genuine No.39101-80JB1-CZT)
(ID No.CLCC02)
SPECIFICATIONS
Radio section
Tuning system: PLL Frequeency synthesizer sys-
tem
Receive range: FM 87.5MHz to 108.0MHz
MW 531kHz to 1602kHz
LW 153kHz to 279kHz
Intermediate frequency:
FM 10.7 +0.2/-0.2MHz
MW 1st 10.71 +0.2/-0.2MHz
2nd 450 +3/-3kHz
LW 1st 10.71 +0.03/-0.03MHz
2nd 450 +3/-3kHz
FM Separation: 22 +5/-7dB
Quieting sensitivity: FM Less than 15dBu
(at 30dB S/N)
PS-3025K-A;
MW Less than 34dBu
(at 20dB S/N)
LW Less than 40dBu
(at 20dB S/N)
PS-3025K-B;
MW Less than 39dBu
(at 20dB S/N)
LW Less than 45dBu
(at 20dB S/N)
Auto tuning stop sensitivity:
FM 22 +6/-6dBu
PS-3025K-A;
MW 32 +6/-6dBu
LW 32 +6/-6dBu
PS-3025K-B;
MW 42 +6/-6dBu
LW 42 +6/-6dBu
CD section
Disc: 12cm Disc
Separation: More than 55dB
S/N ratio: More than 70dB(JIS-A)
Distortion: Less than 0.3%(20kHz-LPF)
MP3/WMA section
MP3 sampling rate: 11.025kHz to 48kHz
MP3 bit rate: 8kbps to 320kbps/VBR
WMA bit rate: 48kbps to 192kbps
Logical format: ISO9660 level 1,2
JOLIET or Romeo
General
Rated Voltage : DC 13.2V
Quiting Output: More Than 12Wx4 (10% Dist.)
More Than 16Wx4 (Max Output)
Back-up consumption: Less than 5mA
Dimensions(mm): 248.4(W)x141.5(H)x176.9(D)
Weight: approx.1.8kg
* Please measure it auto loud function off.The auto loud
function off by pushed 1ch,2ch and the up button.
Model

Clarion PS-3025K-A Specifications

General

Category	Car Receiver
DIN Size	1-DIN
Frequency Response	20Hz - 20kHz
Playable Media	CD
Tuner Bands	AM/FM
Channels	4
Dimensions	178 x 50 x 160 mm

Summary

Specifications

General Specifications

General electrical and physical specifications of the unit.

Repair and Inspection Safety Guidelines

Use Specified Parts

Emphasizes using correct parts for safety and performance during repairs.

Restore Original Placement

Instruction to restore original wiring and component placement after service.

Post-Repair Safety Check

Final safety check to ensure secure assembly and prevent issues.

Automotive Wiring Precautions

Precautions for safely disconnecting battery and connecting wires during automobile repair.

Soldering Cautions

Guidelines for proper soldering techniques and avoiding damage.

Chip Capacitor Soldering

Specific instructions for soldering heat-sensitive chip capacitors.

Chip Part Handling

Flexible PWB Handling

Power Off Before Disassembly

Instruction to power off the unit before disassembly and replacement.

Optical Pickup Safety

Safety advice regarding laser exposure from the optical pickup.

Optical Pickup Handling

Guidance on safely handling the optical pickup to prevent damage.

General Cautions

Circuit Diagram

Main PWB (B1) Section 1;4

Switch PWB (B2) Section

Circuit Diagram Continuation

Main PWB (B1) Section 2;4

Main PWB (B1) Section 3;4

Main PWB (B1) Section 4;4

Disassembly Instructions

How to Remove CD-PWB-ASSY

Step-by-step guide for removing the CD-PWB-ASSY.

How to Remove DISCHOLDER UNIT

Step-by-step guide for removing the DISCHOLDER UNIT.

Disassembly Instructions Continuation

How to Remove DRIVE UNIT

Step-by-step guide for removing the DRIVE UNIT.

How to Remove LO-MOTOR-S-ASSY

Step-by-step guide for removing the LO-MOTOR-S-ASSY.

How to Remove M-MTR SUB ASSY

Step-by-step guide for removing the M-MTR SUB ASSY.

How to Remove UD-MOTOR-ASSY

Step-by-step guide for removing the UD-MOTOR-ASSY.

Circuit Diagrams

CD PWB (BM1) Section Circuit