Sirius Satellite Radio Operations
I
Manual memory
1.
Select the desired channel with seek tuning,
manual tuning
or
preset tuning.
2.
Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store the current
channel into preset memory.
Notes:
• When the name
of
a channel stored
in
memory is
changed by
a broadcasting channel, the display may
show a channel name that differs from the stored
name.
• A channel stored
in
memory may be discontinued
at the option
of
the broadcasting channel.
Category selection function
SIRIUS Radio allows you to select broadcast
channel category (contents).
Receiving channels selected by
category
This starts seek tuning and broadcast channels
that meet the specified category are selected.
The "CAT" indicator is displayed during the
category selection mode.
1.
Press the [CAT] button to enter the category
selection mode.
2. Turn the [ROTARY] knob clockwise or
counterclockwise to select a category.
Or,
press a [DIRECT] button if the category
is preset.
*When 1 second has passed after selecting the
category,
UP
SEEK
is
automatically
performed,
and
a channel of the selected
category
is
received.
You
can also perform
seeking
by
using the
[1-iC
...] or [...
..-t]
button.
3.
Press the [CAT] button again to cancel.
Notes:
• When the category selection mode is entered, the
category
of
the last received channel is displayed
first.
• The category selection mode is canceled when
no channel with the selected category can be
found.
• Press the
[f-tftfJ
or
rlt+lJ
button within 7 seconds
after
a channel has been set
to
continue seeking
channels up
or
down.
The
category selection
mode
is canceled
and
normal reception is
resumed
if
no
operation is performed for 7
seconds.
20 CMD4A
Presetting a category
A category can be preset by registering specific
categories in [DIRECT] buttons 1 to
6.
Then the
desired category can be recalled by pressing
the corresponding [DIRECT] button.
1.
Press the [CAT] button to enter the category
mode.
2. Turn the [ROTARY] knob clockwise or
counterclockwise to select a category.
3.
Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store the current
category into preset memory.
Notes:
• When the name
of
a channel stored in memory is
changed
by
a broadcasting channel, the display
may
show a channel name that differs from the
stored name.
• A channel stored
in
memory may be discontinued
at the option
of
the broadcasting channel.
Category scanning
In a category scan, broadcast channels in the
same category as the current channel are
selected about every 10 seconds.
1.
Press and hold the
[CAn
button for 1 second
or longer to start a category scan.
2.
Press the [CAT] button, a [DIRECT] button,
the [
.........
] or
["''''''1
button to cancel a
category scan.
Note:
• Category scanning is not available when no
category is defined for the current channel.
To Next Page
Loading...
