34
CMD5
English
CD/MP3/WMA
Sound is cutting 
out or skipping.
Noise is generated 
or noise is mixed 
with sound.
MP3/WMA files are not 
encoded properly.
Use MP3/WMA files encoded properly.
Sound is bad 
directly after power 
is turned on.
Water droplets may form 
on the internal lens in a 
humid place.
Let dry for about 1 hour with the power on.
Wrong filename. File system is not correct. Use ISO9660 level 1, 2 or JOLIET or Romeo file 
system.
CeNET
Source selection 
does not recognize 
CeNET source 
connection.
The microprocessor has 
not stored the proper 
CeNET information.
Perform a system check. See āCommon 
Operationsā, performing a system check section.
The CeNET cable is not 
connected properly.
Ensure the CeNET cables are properly 
connected.
Problem Cause Measure