What to do if my Clarion Marine Equipment remote is not responding?
If the remote for your Clarion Marine Equipment isn't responding, the built-in internal processor might not be working right. Try pressing the RESET button using a ball point pen.
Why won't my Clarion Marine Equipment pair with my Bluetooth device?
If you're having trouble pairing your Bluetooth device with the Clarion Marine Equipment, it could be due to a couple of reasons. First, the device might not support the profiles required for the system, in which case you should try using another device. Also, ensure that the Bluetooth function on your device is enabled. Refer to your device's user manual for instructions on how to enable Bluetooth.
Why is there no sound coming from my Clarion Marine Equipment?
If you're not getting any sound from your Clarion Marine Equipment, there could be a couple of reasons. First, check the volume level and make sure it isn't set too low. If the volume is at an audible level, verify that all wiring connections are properly connected.
What to do if my Clarion Marine Equipment will not power on?
If your Clarion Marine Equipment isn't powering on, the vessel's accessory switch might not be activated. If the power supply is correctly connected to the vessel’s accessory terminal, try switching the ignition key to the “ACC” position.
What to do if auto seek function can not find any stations on my Clarion Marine Equipment?
If the auto seek function on your Clarion Marine Equipment isn't finding any stations, it might be because the antenna cable isn't connected properly. Make sure the antenna cable is securely inserted. If the cable is connected, the signals might be too weak, so try selecting a station manually.
How to improve poor audio quality via Bluetooth on Clarion Marine Equipment?
If the audio quality is poor after connecting to a Bluetooth device, the Bluetooth reception might be weak. Try moving the device closer to the audio system or removing any obstacles between the device and the system.
General| Display Size | 3.5 inches |
|---|---|
| Water Resistance | IP66 |
| Bluetooth | Yes |
| USB Ports | 1 |
| Compatible Formats | MP3, WMA |
| Pre-amp Outputs | 6-channel |
| Built-in Amplifier | Yes |
| Auxiliary Input | Yes |
| Marine Certified | Yes |
| Compatible with Marine Audio Sources | Yes |
| Resolution | 320 x 240 |
| Type | Marine Digital Media Receiver |
| Source | Bluetooth, USB |
Details FCC compliance rules and interference mitigation measures.
Outlines Industry Canada (IC) compliance and operational conditions.
Details the wired remote controls (MW1 and MW3) and their layout.
Shows the reset button location on the black box unit.
Lists registered trademarks and logos used in the manual and product.
Explains how to turn the unit on/off and switch sources.
Details how to adjust the volume up and down and mute audio.
Describes button functions for navigation and menu selection.
Explains the purpose and usage of the reset button on the black box.
Covers fundamental unit operation and powering on/off.
Instructions for increasing, decreasing, and muting audio volume.
How to cycle through and select available audio sources.
Adjust EQ, loudness, subwoofer, and tone controls.
Configure auxiliary input sensitivity and Bluetooth connection.
Manage beep tones, reset settings, and view system information.
Select tuner mode, tune stations, recall, and store presets.
Automatically store stations, adjust local/distant seeking, and set area.
Tune weather band channels and recall stored stations.
Initiates a scan for available weather band stations.
Display Radio ID, navigate channels, and manage presets.
Access Go Live, Category Search, and Direct Tune.
How to set up channels to be locked or unlocked based on content.
Explains how to set and manage the parental control passcode.
Allows pausing, rewinding, and replaying live SiriusXM radio.
How to change the display to show channel name, artist, or song title.
Resets SiriusXM specific settings to their factory defaults.
Connect USB devices and perform basic track navigation and playback.
Select folders and search for specific files on the USB device.
Set repeat modes, shuffle playback, and intro playback features.
View ID3 information for audio files played from USB.
Connect iPod/iPhone and perform basic track navigation and playback.
View compatible devices and search for content on iPod/iPhone.
Set repeat modes and shuffle playback for iPod/iPhone content.
View iPod/iPhone specific information on the unit display.
Adjust the sensitivity for the auxiliary audio input.
Pair devices, disconnect, and understand audio streaming.
Search files, play/pause, and navigate tracks via Bluetooth.
Set repeat and shuffle modes for Bluetooth audio playback.
View ID3 information for Bluetooth audio playback.
Addresses common issues like power, sound, and remote response.
Troubleshoots problems with Bluetooth pairing and audio quality.
Explains advisory messages for SiriusXM tuner and reception.
Details FM, AM, and Weather Band tuner frequencies and sensitivity.
Covers power supply, impedance, operating temperature, and audio output.
Lists USB and Bluetooth version, profiles, and compatibility.
Important preliminary steps and warnings before installation.
Cautions and guidelines for safe and proper unit installation.
Instructions for mounting and installing the optional wired remote.
To Next Page
