CDIMP31WMAIAAC Operations
•
Logical
format
(File
system)
1.
When writing MP3IWMAJAAC file
on
a CD-R
disc or CD-RW disc, please select
"IS09660
level
1,2
or JOLIET or Romeo" or APPLE
ISO as the writing software format. Normal
play may not be possible if the disc is
recorded on another format.
2.
The folder name and file name can be
displayed as the title during MP3IWMAJAAC
play but the title must be within 64 single
byte alphabetical letters and numerals
(including an extension).
3.
Do not affix a name to a file inside a folder
having the same name.
•
Folder
structure
1.
A disc with a folder having more than 8
hierarchical levels will be impossible.
•
Number
of
files
or
folders
1.
Up to 255 files can be recognized per folder.
Up to 510 files can be played.
2.
Tracks are played
in
the order that they were
recorded onto a disc. (Tracks might not
always be played
in
the order displayed on
the PC.)
3.
Some noise may occur depending
on
the
type of encoder software used while
recording.
Set the type
of
file
to
be
played
(multi-session
function)
When a single disc holds both normal CD type
tracks and MP3IWMAJAAC type tracks, use this
command to select which type of track to play.
* Default setting
is
"MULTI-SESS
CD".
• When only one type of track (either music CD
or MP3IWMAJAAC) is recorded on a disc,
selecting either type will allow playback of the
disc.
• When playing CCCD (copy-control CDs), set
to CD type.
1.
Press and hold the [BND] button for 1
second or longer.
Each time the button is held pressed
in
this
way, the playback type alternates between
CD type and MP3IWMAJAAC type.
• "MULTI-SESS CD"
When playing music CD only.
• "MULTI-SESS MP3"
When playing music MP3/WMA/AAC only.
2.
When setting is completed, remove the disc
and reinsert
it.
Disc-In-Play
function
As long as the ignition key is turned to the ON or
ACC position, this function allows you to turn the
power to the unit and start playing the disc
automatically when the disc is inserted even if
the power is not turned on.
A CAUTION
• Do
not
try
to
put
your
hand
or
fingers
in
the
disc
insertion
slot.
Also
never
insert
foreign
objects
into
the
slot.
• Do
not
insert
discs
where
adhesive
comes
out
from
cellophane
tape
or
a rental CD
label,
or
discs
with
marks
where
cellophane
tape
or
rental CD
labels
were
removed. It
may
be
impossible
to
extract
these
discs
from
the
unit
and
they
may
cause
the
unit
to
break
down.
Backup
Eject
function
Just pressing the
[~]
button, ejects the disc
even
if
the power to the unit was not turned on.
1.
Press the
[~]
button to eject the CD. Take
it
out from the ejected position. "EJECT"
appears
in
the
display.
Notes:
•
If
a CD (12 em)
is
left
in
the ejected position for
15 seconds, the CD is automatically reloaded
(Auto reload).
•
If
you force a CD into before auto reloading, this
can damage the CD.
20
CX400
CDIMP31WMAIAAC Operations
•
Logical
format
(File
system)
1.
When writing MP3IWMAJAAC file
on
a CD-R
disc or CD-RW disc, please select
"IS09660
level
1,2
or JOLIET or Romeo" or APPLE
ISO as the writing software format. Normal
play may not be possible if the disc is
recorded on another format.
2.
The folder name and file name can be
displayed as the title during MP3IWMAJAAC
play but the title must be within 64 single
byte alphabetical letters and numerals
(including an extension).
3.
Do not affix a name to a file inside a folder
having the same name.
•
Folder
structure
1.
A disc with a folder having more than 8
hierarchical levels will be impossible.
•
Number
of
files
or
folders
1.
Up to 255 files can be recognized per folder.
Up to 510 files can be played.
2.
Tracks are played
in
the order that they were
recorded onto a disc. (Tracks might not
always be played
in
the order displayed on
the PC.)
3.
Some noise may occur depending
on
the
type of encoder software used while
recording.
Set the type
of
file
to
be
played
(multi-session
function)
When a single disc holds both normal CD type
tracks and MP3IWMAJAAC type tracks, use this
command to select which type of track to play.
* Default setting
is
"MULTI-SESS
CD".
• When only one type of track (either music CD
or MP3IWMAJAAC) is recorded on a disc,
selecting either type will allow playback of the
disc.
• When playing CCCD (copy-control CDs), set
to CD type.
1.
Press and hold the [BND] button for 1
second or longer.
Each time the button is held pressed
in
this
way, the playback type alternates between
CD type and MP3IWMAJAAC type.
• "MULTI-SESS CD"
When playing music CD only.
• "MULTI-SESS MP3"
When playing music MP3/WMA/AAC only.
2.
When setting is completed, remove the disc
and reinsert
it.
Disc-In-Play
function
As long as the ignition key is turned to the ON or
ACC position, this function allows you to turn the
power to the unit and start playing the disc
automatically when the disc is inserted even if
the power is not turned on.
A CAUTION
• Do
not
try
to
put
your
hand
or
fingers
in
the
disc
insertion
slot.
Also
never
insert
foreign
objects
into
the
slot.
• Do
not
insert
discs
where
adhesive
comes
out
from
cellophane
tape
or
a rental CD
label,
or
discs
with
marks
where
cellophane
tape
or
rental CD
labels
were
removed. It
may
be
impossible
to
extract
these
discs
from
the
unit
and
they
may
cause
the
unit
to
break
down.
Backup
Eject
function
Just pressing the
[~]
button, ejects the disc
even
if
the power to the unit was not turned on.
1.
Press the
[~]
button to eject the CD. Take
it
out from the ejected position. "EJECT"
appears
in
the
display.
Notes:
•
If
a CD (12 em)
is
left
in
the ejected position for
15 seconds, the CD is automatically reloaded
(Auto reload).
•
If
you force a CD into before auto reloading, this
can damage the CD.
20
CX400
To Next Page
Loading...
Need help?
General
