Clarion DB345MP User Manual

I
Radio Mode Operations
FM Reception
For enhanced FM performance the MfiGI- TUNE@
tuner includes signal actuated stereo control and
multipath noise reduction circuits.
Listening to the radio
1. Press the [FNC] button and select the radio
mode. then the radio will be on.
2.
To select a preset band, press the [BND] but-
ton, then select one of the preset bands such
as FM1, FM2, FM3 or
AM. Every time the [BND]
button
is pressed, the display will change as:
FM1 .... FM2 .... FM3 .... AM .... FM1
3. Press the [<-.] or [ .. >] button to tune in the
desired station.
Manual Tuning
1. Press the [BND] button to select the desired
band FM1, FM2, FM3 or AM.
2. Press and hold the [BND] button for 2 sec-
onds or longer, then the
"MANU" is lit in the
display, which means that a manual selection
function
is on.
3. Press the [<-.] or [ .. >] button to manually
tune in a station.
Seek Tuning
1. Press the [BND] button to select the desired
band FM1, FM2, FM3 or AM.
2. If the "MANU" is lit in the display, press and
hold the [BND] button for 2 seconds or
longer. When the "MANU" display
is off, the
seek tuning
is now available.
3. Press the
[<-.] or [ .. >] button to automatically
seek in a station.
Preset Memory Function
Preset Memory Function can store up to 24 sta-
tion: six station for each of FM1, FM2, FM3 and
AM.
Manual memory function
1. Press the [BND] button, to select a band you
want to store in the memory.
2. Press the [<-.] or [ .. >] button to tune into a
desired station.
3. Press and hold one of the [DIRECT] button
for 2 seconds
or longer to store the current
station into preset memory.
Auto store function
(Automatic Station Store)
1. Press [BND] button to select the desired
band FM1, FM2, FM3 or AM.
2. Press and hold the
[PS/AS] button for 2 sec-
onds or longer. The stations at which the re-
ception is the strongest will be automatically
stored
in the memory.
Notes:
• When the auto store is performed, the station pre-
viously store
in the memory at that position is
overwritten.
• When the number
of stations stored is less than
six, the previous content of the memory for each
direct button will
be retained.
Preset Scanning (Preset Station
Scan)
When the [PS/AS] button is pressed, the "SeN"
will be indicated with preset memory numbers
and the stations are tuned in for
7 seconds each
in the order in which they were stored. Press the
[PS/AS] button again to cancel the preset scan-
ning mode.
Instant Station Recall (lSR)
With this function, a specific radio station can be
recalled from any mode.
ISR
memory
1. Press the [FNC] button, then select the radio
mode.
2. Select the radio station which you want to
store
in the memory.
3. Press and hold the [ISR] button for 2 sec-
onds or longer.
12
DB345MP

Clarion DB345MP Specifications

General

Brand	Clarion
Model	DB345MP
Category	Car Receiver
Language	English