Clarion DB345MP User Manual

~ .,..., ~ ~ ~
9. ~R'.LJ.lEI.m<m.IR. ,
Power does not turn on.
(No sound is produced.)
Compact disc cannot
be
loaded.
Sound skips or is noisy.
Sound
is bad directly after
power is turned
on.
Nothing happens when
button are pressed.
Display
is not accurate.
Fuse
is blown.
Incorrect wiring.
Another compact disc is
already loaded.
Compact disc
is dirty.
Compact disc
is heavily
scratched or warped.
Water droplets may form
on
the internal lens when the car
is parked
in a humid place.
The microprocessor has
malfunctioned due
to noise,
etc.
DCP or main unit connectors
are dirty.
Replace with a fuse of the same amperage.
If
the fuse blows again, consult your store of
purchase.
Consult your store of purchase.
Eject the compact disc before loading the new
one.
Clean the compact disc with a soft cloth.
Replace with a compact disc with no scratches.
Let dry for about 1 hour with the power on.
Turn off the power, then press the
[RELEASE]
button and remove the DCP.
Press the reset button for about 2 seconds with
a thin rod.
Reset button
Wipe the dirt off with a soft cloth moistened with
cleaning alcohol.
DB345MP 19
I

Clarion DB345MP Specifications

General

Brand	Clarion
Model	DB345MP
Category	Car Receiver
Language	English