TV Operations
TV
tuner
functions
When an optional TV tuner
is
connected through
the CeNET cable, this unit controls all TV tuner
functions.
To
watch TV requires a TV tuner and
monitor.
Watching
a
TV
1.
Press the [SRC] button and select the TV
mode.
2.
Press the [BND] button to select the desired
TV
band (TV1 or TV2). Each time the button
is pressed, the input selection toggles
between TV1 and TV2.
3.
Press the [
........
] or [.......] button to tune
in
the
desired TV station.
Watching
a
video
The TV tuner has a VTR input terminal to which
1 external device can
be
connected. Connect a
12 V video cassette player (VCP) or video
cassette recorder (VCR) to the TV tuner input
terminal.
1.
Press and hold the [A] button for 1 second or
longer to select VTR.
2.
To return to the
TV
broadcast, press and hold
the [A] button for 1 second or longer.
Tuning
There are 3 types of tuning mode available, seek
tuning, manual tuning and preset tuning.
Seek
tuning
1.
Press the [BND] button and select the desired
TV band (TV1 or TV2).
'"
If
"MANU"
is
lit
in
the display, press
and
hold
the [BND] button for 1 second
or
longer.
"MANU"
in
the display goes off
and
seek tuning
is
now available.
2.
Press the [
........
] or [.......] button to
automatically seek a station. Press the [.......]
button to automatically tune up the frequency
band to the next available TV station; press
the [
........
] button to automatically tune down.
Manual
tuning
There are 2 ways available: Quick tuning and
step tuning.
When you are
in
the step tuning mode, the
frequency changes one step at a time.
In
the
quick tuning mode, you can quickly tune the
desired frequency.
1.
Press the [BND] button and select the desired
band
(TV1
or
TV2).
If
"MANU"
is
not
lit
in
the
display, press
and
hold
the {BND] button for 1 second
or
longer.
"MANU" lights
in
the display
and
manual tuning
is
now
available.
2.
Tune into a station.
•
Quick
tuning:
1.
Press and hold the
[I
.......] or [......
1]
button for 1
second
or
longer to tune
in
a station.
.Step
tuning:
1.
Press the [
.........
] or [......
1]
button to manually
tune
in
a station.
Recalling
a
preset
station
A total of 12 TV stations can be stored (6-TV1
and 6-TV2). This allows you to select your
favorite TV stations and store them
in
memory for
later recall.
1.
Press the [BND] button and select the desired
TV band
(TV1
or TV2).
2.
To recall a stored TV station, press the
desired [DIRECT] button to select that station.
Notes:
• Be careful
not
to press
and
hold
one
of
the
[DIRECT] buttons for
2 seconds
or
fonger,
otherwise the un;[ starts stodng that station into
preset memory.
Manual
memory
1.
Select the desired station with seek tuning,
manual tuning or preset tuning.
2.
Press and hold one of [DIRECT] buttons for 2
seconds or longer to store the current station
into preset memory.
I
DFZ675MC
29
To Next Page
Loading...
