iPod Operations
iPod
functions
Connecting the iPod CeNET Controller allows
you to operate your iPod from the operation
panel of this unit. This unit has the iPod MENU
mode which allows you to operate by the same
feeling as operating on the iPod.
In
the iPod mode, this system considers all the
tracks stored
in
the iPod as one album when
selecting tracks or playing them back. To search
tracks bythe album title or the artist name by the
similar operations from the Music menu of the
iPod, refer to the subsection "Selecting
tracks
in
the
iPod
MENU
mode"
(page 32)
in
the section
"iPod
Operations".
Notes
on
using
iPod
You can connect the following iPods:
• iPod G3 Ver. 2.3 or higher
• iPod G4 Ver.
3.1
or higher
• iPod Photo Ver. 1.2 or higher (Images cannot
be
displayed)
• iPod mini Ver. 1
A or higher
• iPod nano Ver. 1.0 or higher
Notes:
• iPod shuffle cannot be connected.
• When the iPod
is connected, the operations on the
iPod are prohibited.
•
The
characters that can be displayed are
alphanumeric characters only. 2-byte characters
cannot be displayed.
Selecting
iPod
mode
1.
Press the [SRC] button to select the iPod
mode.
Notes:
• When "NO IPOD" is displayed, check whether the
connectors
of
the iPod
and
iPod CeNETController
are correctly connected.
Switching
the
display
1.
Press the [0] button to select the desired
display.
2.
Each time you press the
[0]
button, the
display switches
in
the following order:
Number
of
tracks
display
The number of tracks
in
the Music menu currently
played back and the current track
number are displayed.
Play
time
display
The current track number and play time are
displayed.
Title
display
The album title, artist name and song title of the
current track are displayed.
Press the [TITLE] button while the title
is
displayed switches the title display
as
follows:
ALBUMS'"
ARTISTS'"
SONGS ...
ALBUMS
...
Notes:
• Title characters which cannot be displayed
by
this
unit are displayed with
"*".
Pausing
play
1.
Press the
~II]
button during playback. The
playback is paused.
2.
To resume playback, press the
~II]
button
again.
Selecting
a
track
.Track-up
1.
Press the
[~]
button during playback to
move ahead to the beginning of the next track.
.Track-down
1.
Press the [......] button during playback to
move back to the beginning of the current
track.
2.
Press the [......] button again within 2 seconds
after the beginning of the track to move to the
beginning of the previous track.
Fast.forward/fast-rewind
•
Fast·forward
1.
Press and hold the
[~]
button for 1 second
or longer during playback.
•
Fast-rewind
1, Press and hold the
[I
.....
] button for 1 second
or longer during playback.
All
play
This plays back all the tracks. It corresponds to
the iPod operation of playing back tracks
sequentially by selecting "Music"
...
"Songs"
from the menu of the iPod.
1.
Press and hold the [BND] button for 1 second
or longer. It changes to the ALL PLAY mode,
and all the tracks stored
in
the iPod are played
back sequentially.
DFZ675MC 31
To Next Page
Loading...
Need help?
General
