1.
Press BND button
[IQ]
and select the desired
band
(TV1
or TV2).
>.:
If
"MANU"
is
not lit
in
the display, press
and
hold
BND
button
[IQ]
for 1 second or longer.
"MANU" lights
in
the display
and
manual tun-
ing
is
now
available.
2.
Tune into a station.
•
Quick
tuning:
Press
and
hold
the
right
or
left
side
of
SEARCH button
~
for 1 second or longer to
tune
in
a station.
• Step
tuning:
Press the right or left side of SEARCH button
~
to manually tune
in
a station.
Recalling a
preset
station
A total of 12 TV stations can be stored (6-
TV1
and 6-TV2). This allows you to select your favorite
TV stations and store them
in
memory for later
recall.
1.
Press BND button
[IQ]
and select the desired
TV band
(TV1
or TV2).
2.
To
recall a stored TV station, press the de-
sired Preset button
[[]
to select that station.
* Press
and
hold one of Preset buttons
[]]
for 2
seconds or longer
to
store the current station
into the preset
memory.
Manual
memory
1.
Select the desired station with seek tuning,
manual tuning or preset tuning.
2.
Press and hold one of Preset buttons
[[]
for 2
seconds
or
longer to store the current station
to that preset memory.
Auto
store
Auto store selects 6 TV stations automatically
and stores each one into a preset memory.
If there are not 6 stations with good reception,
stations previously stored
in
memory remain and
only the strong stations are stored into memory.
1.
Press BND button
[IQ]
and select the desired
TV band
(TV1
or TV2).
2.
Press and hold AS button Wfor 2 seconds or
longer. The stations with good reception are
stored automatically to the preset channels.
TV Operations
Preset scan
Preset scan allows the user to view each preset
position before it automatically advances to the
next preset. This function is useful for searching
for desired TV station
in
memory.
1.
Press PS button
W.
2.
When the desired station is found, press PS
button
Wagain to remain tuned to that station.
Note:
• Do notpress and hold PS button
ill
for 2 seconds
or
longer. Doing so will trigger the auto store
function
and
start storing stations into memory.
Setting the TV
diver
You
can change the reception setting for the TV
antenna connected to the TV tuner.
1.
Press
and
hold
ADJ
button
[]]
for
1 second
or
longer
to
switch
to
the
adjustment
selection
display.
2.
Press the right or left side of SEARCH button
~
to select "TV DIVER".
3.
Turn the Rotary knob
[j]
clockwise to set to
"ON" or counterclockwise to set to "OFF".
.ON:
Sets reception emphasizing the visual.
• OFF:
Sets the diver setting to
OFF.
4.
Press ADJ button
rn
to return to the previous
mode.
nX7R1
FiI\,.,P
25
To Next Page
Loading...
Need help?
General
