DSP Operations
DSP
control
function
If the DSP (DPH910), sold separately, is con-
nected to this unit using the CeNET cable, all
functions of the AC Processor can be controlled.
DSF
functions
There are 2 modes available
in
DPH910, STD
mode and professional mode. Choose one of them
and adjust the sound field and the sound quality.
*
STD
mode: Standard mode
•
Functions
common
to
each mode:
Auto loudness, etc.
• Standard mode:
Adjustment using the graphic equalizer function
and the DSF function.
• Professional mode:
Adjustment using the VSE function and the para-
metric equalizer function.
*When the
STD
mode
is
selected, adjustment for
the professional mode cannot
be
made.
On
the
contrary,
when
the professional mode
is
selected,
adjustment for the
STD
mode cannot
be
made.
* For details
on
functions
of
each mode, refer
to
the
owner's
manual
supplied
with
the
OPH910.
* Hereafter the graphic equalizer
is
referred to
as
a
G.EQ, the space equalizer referred to
as
VSE
and
the parametric equalizer referred
to
as
PEQ.
Operations common
to
each
mode
Outputadjustment
of
auto loudness,
subwoofer
and
playback
band
1.
Press and hold ADJ button
rn
for 1 second
or
longer to switch to the adjustment selection
display.
2.
Press the right or left side of SEARCH button
ITID
to select "SOUND".
3.
Press ENT button
[El.
4.
Press the right or left side of SEARCH button
ITID
to select the adjustment item.
There are
"A.LD LEVEL", "WOOFER OUT",
"WOOFER LPF", "HPF"
and "TEST TONE"
available for the adjustment items.
*
For
details
on
each
adjustment
item,
refer
to
the
owner's
manual
supplied
with
the
DPH910.
5.
Turn the Rotary knob
~
clockwise or coun-
terclockwise to make the adjustment.
6. Pressing ENT button
[H}
returns to the adjust-
ment selection display.
7. Press ADJ button
rn
to return to the previous
mode.
26 DXZ815MP
Selecting the
easy
mode
or
the
professional
mode
*The factory default setting
is
"STO".
1.
Press and hold ADJ button
rn
for 1 second or
longer to switch to the adjustment selection
display.
2.
Press the right or left side of SEARCH button
G]]
to select "AC-P SEL".
3.
Turn the Rotary knob
~
clockwise or coun-
terclockwise to set the mode to "STO"
or
"PRO".
4. Press ADJ button
rn
to return to the previous
mode.
Entering titles
You
can give a title to the user memory of the
DSF,
G.EQ, VSE and
PEQ
that you have ad-
justed yourself.
1.
Press A-M button [g] to select the adjustment
mode
in
which you want to give a title.
2.
Press BND button
[1Q]
to select "USR". "USR"
will be displayed
in
the operation status indi-
cation
m.
3.
Press one of Preset buttons
~
to select the
user memory to which you want to give a title.
4.
Press TITLE button
rn.
5.
Press the right or left side of SEARCH button
[11J
to move the cursor.
6.
Press DISP button
[TI]
to select the character
fonts.
There
are
capital
letters,
small
letters,
numbers, symbols and umlaut available for
the character.
7.
Turn the Rotary knob [j]] clockwise or counter-
clockwise to select the character you want to
input.
8.
Repeat steps 5 to 7 to input the title.
9.
Press and hold ENT button
[El
for 2 seconds
or
longer to put the title into memory. The title
input mode is cancelled.
STD mode/G.EQ operations
Note:
•
The
adjustment made
in
standard mode is not re-
flected
in
the adjustment
in
professional mode. On
the contrary, the adjustment made
in
professional
mode is not reflected in the adjustment in easy
mode.
To Next Page
Loading...
Need help?
General
