II.
m~p
The control panel can
be
detached to prevent theft. When detaching the control panel, store it
in
the
DCP (DETACHABLE CONTROL PANEL) case to prevent scratches.
We
recommend taking the DCP with
you
when leaving the car.
Removing the DCP
1.
Hold down PWR button
[]]
for 1 second or
longer to turn off the power.
2.
Deeply push
in
OPEN button
[I]
to unlock the
flip down panel.
* If the flip down panel does not open fully, gently
open it with your hand.
OPEN button
Flip down panel
3.
Pull the DCP toward you and remove
it.
4.
Close the HOLD
FLAP.
HOLD FLAP
Be
sure
to
close
the
HOLD FLAP
for
safety
when removing the
DCP.
Attaching
the DCP
1.
Insert the right side of the DCP into the source
unit.
2.
nsert the left side of the DCP into the source
unit.
• The DCP can easily be damaged
by
shocks.
After
removing
it, be careful
not
to
drop
it
or
subject
it
to
strong
shocks.
•
If
the FLIP DOWN PANEL
is
kept open, the
DCP may
drop
due
to
vibration
of
the
car.
This
results
in damage
to
the
DCP.
So close
the
FLIP DOWN PANEL
or
remove
the
DCP
to
store
into
the
case.
• The
connector
connecting
the
source
unit
and the DCP is an extremely
important
part.
Be careful
not
to
damage
it
by
pressing
on
it
with
fingernails,
screwdrivers,
etc.
Note:
• f the DCP is dirty, wipe
off
the dirt with a soft, dry
cloth only.
7
To Next Page
Loading...
Need help?
General
