Note: Be sure to read this chapterreferring to the front diagrams
of
chapter
"3.
CONTROLS"on page 5 (unfold).
Digital Radio / DAB Operations
DAB
control function
When a CeNET cable is used to connect a DAB
(DAH913) (sold separetely), all functions can
be
operated.
Listening to the DAB station
1.
Press FNC button
[IJ
to select DAB mode.
2.
When the unit receives a DAB station, the
display changes
in
the following order:
Frequency channel
~
service label
Switching displays
Press the DISP button for 1 second during the
Main (service label) display
to
select Main (ser-
vice label) or Sub (PTY).
Note:
• The display shown in the normal reception mode
and
the preset reception mode is the same when
a DAB station is received.
Seek tuning
1.
Press FNC button
[IJ
to select DAB mode.
2.
Press and hold right or left for 1 second or
longer using SEARCH button
[TIl.
*
"SEEK"
appears in the display.
[111
SEE/(
3.
"DAB" lights
up
in
the display when the main
unit receives a
DAB
station.
*The main unit stops the seek. tuning when it
cannot find a DAB station. The display returns
to the previous mode.
Manual tuning
1.
Press FNC button
[IJ
to select DAB mode.
2.
Press
and
hold
BND
button
[!Q]
for 1 second or
longer. "MANU" lights up
in
the display.
3.
Press the right or left SEARCH button
[TIl
to
select a station.
* If no operation is performed for more than 7
seconds, manual tuning is cancelled and the
display returns to the previous mode.
1
·-'B'
-
f-
..::.
,,_. I
Cl
ar-
i
0111]
[N1
[N1
3.
When the unit does not receive a DAB station,
the display changes
in
the following order:
-Normal reception
mode-
[fr11
LE
ch
-Preset
reception
mode-
Switching programs
1.
Press
FNC
button
[IJ
to
receive a
DAB
station.
2.
Press the right or left SEARCH button
[TIl
to
switch programs
in
the DAB station.
Note:
• The program name maybe the same depending on
DAB programs.
[fr11
LE
,:./-,
]
+
[N1
Cl
ar
i
0111]
+
[fr11
LE
':./;
)
Notes:
• The
number
of
programmes
and
broadcasting
times depend on the DAB stations.
• When the strength
of
DAB signals is weak, audio
output is muted.
Program scan
This function scans through each receivable
program
in
a DAB station being received for 10
seconds sequentially. This is useful when you
want to search for a desired program.
1.
Press
FNC
button
[IJ
to receive a
DAB
station.
2.
Perform the following operation depending
on
the connected model.
Press SCN button
@J.
"SCAN" lights
up
and
the unit starts scanning each program for 10
seconds sequentially. Each time the main unit
scans, the program name is shown
in
the
display.
3.
To
stop program scan when a desired program
is tuned
in.
Press SCN button
@J.
30
DXZ815MP
To Next Page
Loading...
Need help?
General
