Selecting a
P.EQ
menu
1.
Press A-M button
[gJ
and select
"P.EO".
"P.EO"
blinks
in
the display.
2.
Press BND button
[Q]
to select "BASC" (ba-
sic). "BASC" is displayed
in
the operation
status indication
m
in
the display.
3.
Press one of Direct buttons
[[]
and select the
desired
PEa
menu.
*
To
select the user memory, press BND button
[}Q]
to select "USR" and press one of Direct
buttons
[ID.
Editing/storing a
P.EQ
menu (User
memory)
1.
Select a
PEa
menu which you want to edit
on the basis of.
2.
Press and hold ADJ button
rn
for 1 second or
longer.
3.
Press the right or left side of SEARCH button
[11J
to select the item to be adjusted.
There are correction channel, correction band,
selection of the centre frequency, gain adjust-
ment and selection of the
a-curve
available
for the items to be adjusted.
* For details
on
each adjustment item, refer
to
the
owner's manual supplied with the DPH910.
4.
Turn
the Rotary knob
!1ID
clockwise or counter-
clockwise to make the adjustment.
5.
Repeat steps 3 to 4 to complete the adjust-
ment and press ADJ button
II].
6.
Press and hold one of Direct buttons
[[]
for 2
seconds or longer to store the edited contents.
*
You
can give a title to the user memory. For
the
inputting
method
of titles, refer to
the
subsection "Entering titles"
in
section "Opera-
tions
common
to
each mode".
DSP Operations
DXZ815MP
29
To Next Page
Loading...
