DSP Operations
:
Editing/storing
a
sound
field
menu
(User memory)
1.
Select a sound field menu which you want to
edit on the basis of.
2. Press and hold ADJ button
rn
for 1 second
or
longer.
3.
Press the right
or
left side
of
SEARCH
button
[1]
to select the item to be adjusted.
There are "EFFECT", "DELAY",
"REAR
MIX",
"REV.TIME"
or
"ROOM SIZE" and "HIGH" or
"LIVENESS" available for the items to be ad-
justed.
*
For
details
on
each
adjustment
item,
refer
to
the
owner's
manual
supplied
with
the
DPH910.
4.
Turn the Rotary knob
[1§J
clockwise
or
coun-
terclockwise to make the adjustment.
5.
Repeat steps 3 to 4 to complete the adjust-
ment and press ADJ button
rn.
6.
Press and hold one of Direct buttons
[]]
for 2
seconds
or
longerto store the edited contents.
*
You
can give a title to the user memory. For
the inputting method of titles, refer to the
subsection "Entering titles"
in
section "Opera-
tions
common
to
each mode".
Professional
modeNSE
operations
Note:
•
The
adjustment made
in
professional mode
is
not
reflected in the adjustment in standard mode. On
the contrary, the adjustment made in standard
mode
is
not
reflected
in the
adjustment
in
professional mode.
VSE
effect
ON/OFF
While the "VSE" indication
II
is lit in the display,
the VSE effect is set to "ON".
*The factory default setting is "ON".
1.
Press A-M button
[gj
and select "VSE".
2. Press DISP button
[ill.
3. Press A-M button [gj. "VSE" in the display lit
or
unlit.
*When "VSE" is unlit, the VSE effect is set to
OFF.
Note:
•
If
the VSE effect is set
to
OFF,
the adjustment
made in
uVSE
operations"
is not reflected
in
the
music source.
28
DXZ815MP
Selecting
an
VSE
menu
1.
Press A-M button
[gj
and select "VSE".
2. Press BND button
[iQ]
to select
"BASC"
(ba-
sic).
"BASC"
is
displayed
in the operation
status indication
min the display.
3.
Press one
of
Direct buttons
[]]
and select the
desired VSE menu.
*
To
select the user memory, press BND button
IIQ]
to select "USR" and press one of Direct
buttons
[[].
Editing/storing
an
VSE
menu
(User
memory)
1.
Select an VSE menu which you want to edit
on the basis of.
2. Press and hold ADJ button
f]J for 1 second or
longer.
3.
Press the right
or
left side of
SEARCH
button
[1]
to select the item to be adjusted.
There are "DIFFUSE", "CAR WIDTH" and "CAR
LENG" available for the items to
be
adjusted.
*
For
details
on
each
adjustment
item,
refer
to
the
owner's manual supplied
with
the
DPH910.
4. Turn the Rotary knob
[1§J
clockwise
or
counter-
clockwise to make the adjustment. The adjust-
ment range is from 1 to 10 for each item.
5.
Repeat steps 3 to 4 to complete the adjust-
ment and press ADJ button
rn.
6.
Press and hold one of Direct buttons
[]]
for 2
seconds or longer to store the edited contents.
*
You
can give a title to the user memory. For
the inputting method of titles, refer to the
subsection "Entering titles"
in
section "Opera-
tions
common
to
each mode".
Professional
mode/P.EO
operations
P.EQ
effect
ON/OFF
While the "P.EQ" indication
1m
is lit in the dis-
play, the P.EQ effect is
set
to "ON".
*The factory default setting is "ON".
1.
Press A-M button
[gJ
and select "P.EQ".
2. Press DISP button
[TIJ.
3.
Press A-M button
[gJ.
"P.EQ" in the display is
changed from blinking to lit
or
unlit.
*
When
"P.EQ"
is
unlit,
the
P.EQ
effect
is
set
to
OFF.
Note:
•
If
the
P.
EO effect
is
set
to
OFF,
the adjustment
made
in
uP.EQ
operations"
is
not reflected
in
the
music source.
To Next Page
Loading...
Need help?
General
