G.EQ
effect
ON/OFF
While the "G.EQ" indication
1m
is lit in the dis-
play, the G.EO effect is set to "ON".
*The factory default setting is "ON".
1.
Press A-M button
[gJ
and select "G.EQ".
2. Press DISP button
[TIJ.
3.
Press A-M button
[gJ.
"G.EQ"
in
the display lit
or
unlit.
*When "G.EQ" is unlit, the G.EQ effect is set to
OFF.
Note:
• If the
G.
EO effect
is
set
to
OFF,
the adjustment
made
in
"G.EQ
operations"
is
not reflected
in
the
music source.
Selecting a G.EQ
menu
1.
Press A-M button
[gJ
and select "G.EQ".
2.
Press BND button
[1Q]
to select
"BASC"
(ba-
sic).
"BASC"
is displayed in the operation
status indication
m
in
the display.
3.
Press one of Direct buttons
II]
and select the
desired G.EO menu.
*
To
select the user memory, press BND button
[!Q]
to select "USR" and press one of Direct
buttons
[!].
Editing/storing
a G.EQ
menu
(User
memory)
1.
Select a G.EO menu which you want to edit
on the basis of.
2.
Press and hold ADJ button
~
for 1 second
or
longer.
3.
Press the right
or
left side of SEARCH button
~
to select the frequency to be adjusted.
There are 50Hz, 100Hz, 200Hz, 400Hz, 1kHz,
3kHz and 12kHz available for the adjustment
frequency.
*
For
details
on
each
adjustment
item,
refer
to
the
owner's
manual
supplied
with
the
DPH910.
4.
Turn the Rotary knob [j]] clockwise or counter-
clockwise to make the adjustment.The adjust-
ment range is from
-6
to 6.
5.
Repeat steps 3 to 4 to complete the adjust-
ment and press ADJ button
~.
6.
Press and hold one of Direct buttons
II]
for 2
seconds
or
longerto store the edited contents.
*
You
can give a title
_to
the user memory. For
the inputting method of titles, refer to the
subsection "Entering titles"
in
section "Opera-
tions
common
to
each mode".
DSP Operations
STD mode/DSF operations
DSF
effect
ON/OFF
When the "DSF" indication II is lit in the display,
the DSP effect is set to "ON".
*The factory default setting is "ON".
1.
Press A-M button
[1g]
and select "DSF".
2. Press DISP button
[TIJ.
3.
Press A-M button
[1g].
"DSF" in the display lit
or
unlit.
*
When
"DSF"
is
unlit,
the
DSF
effect
is
set
to
OFF.
Note:
•
If
the
DSF
effect is set to
OFF,
the adjustment
made
in
"DSF
operations"
is
not reflected in the
music source.
Setting
the
listening
position
menu
1.
Press A-M button
[gJ
and select "DSF".
2. Press the right
or
left side of SEARCH button
~
to set the listening position type.
There are FULL SEAT, FRONT-R, FRONT-L,
FRONT (only front seats), REAR (only rear
seats) and PASS available for the listening
position types.
*The factory default setting
is
"FULL SEAT".
Making fine
adjustment
of
the
listening
position
1.
Upon
completion
of
setting
the
listening
position, press ENT button
[H].
2. Press the right
or
left side of SEARCH button
[1]]
to select
"BALANCE"
or
"FADER".
The
selected item blinks.
3.
Turn the Rotary knob
IIID
clockwise
or
counter-
clockwise to adjust the balance and the fader.
4.
Press ENT button
[H]
to return to the DSF
mode.
Selecting a
sound
field
menu
1.
Press A-M button
[1]
and select "DSF". "DSF"
blinks in the display.
2. Press BND button
[1Q]
to select "BSC1" (ba-
sic-1) or "BSC2" (basic-2). "BSC1"
or
"BSC2"
is displayed
in
the operation status indication
min the display.
3.
Press one of Direct buttons
II]
and select the
desired sound field menu.
*
To
select the user memory, press BND button
[!Q]
to select "USR" and press one of Direct
buttons
00.
To Next Page
Loading...
Need help?
General
