8
FZ104P
AE
GENERAL
Pr
oblem Cause Measure
Unit can not
power on.
Unit fuse blown. Replace with new fuse of correct rating.
Car battery fuse blown. Replace with new fuse of correct rating.
No/low audio output. Improper audio output
connection.
Check wiring and correct.
Volume set too low. Increase volume level.
Speakers damaged. Replace speakers.
Heavily biased volume
balance.
Adjust the channel balance to center position.
Speaker wiring is in contact
with metal part of car.
Insulate all speaker wiring connections.
Poor sound quality or
distortion.
Speaker power rating does
not match unit.
Replace speakers.
Wrong connections. Check wiring and correct.
Speaker is shorted. Check wiring and correct.
Unit resets itself
when engine is off.
Incorrect connection
between ACC and Battery.
Check the wiring and correct.
USB
Pr
oblem Cause Measure
USB device cannot
be inserted.
The USB device has
been inserted incorrectly.
Re
versing the connection direction of the USB
device, try it again.
The USB connector is
broken.
Replace with a new USB device.
USB device is not
recognized.
The USB device is
damaged.
Disconnect the USB device and reconnect. If
the device is still not recognized, try replacing
with a different USB device.
Connectors are loose.
No sound heard with
the display “No File”
shown.
No MP3/WMA file is stored
in the USB device.
Store these files properly in the USB device.
Sound skips or is
noisy.
MP3/WMA files are not
encoded properly.
Use MP3/WMA files encoded properly.
6.
TROUBLESHOOTING
English
Owner’
s Manual
To Next Page
Loading...
