Clarion M275 User Manual

Basic Operations
3. Turning the [ROTARY] knob to adjust the
selected Sound mode.
Z-EHCR
Selection type : OFF
~ B-BOOST ~
IMPACT~ EXCITE ~OFF. ..
BASS
Adjustment range: -7 to +7
TREBLE
Adjustment
range: -7 to +7
BALANCE:
Adjustment range: LEFT 12 to RIGHT 12
FADER :
Adjustment
range: FRONT 12 to REAR 12
Notes:
• If no operation is performed for more than 10 sec-
onds, the Audio mode is cancelled and returns to
the previous mode.
• Bass and Treble can only be adjusted when the
"Z-EHCR" is off.
Setting the Z-Enhancer
This unit is provided with 3 types of sound tone
effects stored
in memory. Select the one you pre-
fer.
2-1. Press the [ ......, ~] button and select "Z-
EHCR".
3-1. Turning the [ROTARY] knob to change to the
following sound tone effect.
"OFF"
t
"B-BOOST"
t
"IMPACT"
t
"EXCITE"
• OFF : no sound effect
•
B-BOOST: b~ emphasized
(~;:r indicator lights in the display)
• IMPACT :
b~ and treble emphasized
(~;r indicator lights in the display)
• EXCITE : bass and treble emphasized mid
de-emphasized
((~) indicator lights in the display)
Note:
• The factory default setting is "OFF".
Adjusting the bass
2-1. Press the [ ...... , ~] button and select
"BASS".
3-1. Turning the [ROTARY] knob clockwise em-
phasizes the bass; turning it counterclock-
wise attenuates the bass.
"BASS XX" will be displayed where "XX"
is
the value from -7 to +7.
Note:
• The factory default setting is "BASS 0".
Adjusting the treble
2-1. Press the [ ...... , ~] button and select
"TREBLE".
3-1. Turning the [ROTARY] knob clockwise em-
phasizes the bass; turning it counterclock-
wise attenuates the bass.
"TREB XX" will be displayed where "XX" is
the value from -7 to +7.
Note:
• The factory default setting is "TREB 0".
Adjusting the balance
2-1. Press the [ ...... , ~ ] button and select
"BALANCE".
3-1. Turning the [ROTARY] knob clockwise em-
phasizes the sound from the right speaker;
turning it counterclockwise emphasizes the
sound from the left speaker.
The display changes as follows:
"RIGHT XX" will be displayed where "XX" is
the value from 1 to 12.
"LEFT XX" will be displayed where "XX" is
the value from 1 to 12.
Notes:
• When Balance is 0, "CENTER" will be displayed
instead.
• The factory default setting is "CENTER".
10 M275

Clarion M275 Specifications

General

Brand	Clarion
Model	M275
Category	Car Receiver
Language	English