EasyManuals Logo

Clarion M275 User Manual

Clarion M275
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
Note: Be sure to read this chapter referring to the front diagrams
of
chapter "2. CONTROLS" on page 3 (unfold).
Basic Operations
Be
sure
to
lower
the
volume
before
switch-
ing
off
the
unit
power
or
the
ignition
key. The
unit
remembers
its
last
volume
setting. If
you
switch
the
power
off
with
the
volume
up,
when
you
switch
the
power back on,
the
sud-
den loud
volume
may
hurt
your
hearing and
damage
the
unit.
Turning
on/off
the
power
Note:
Be careful about using this unit for a long time
without running the engine. If you drain the boat's
battery too much, you may not be able to start the
engine and this can reduce the service life of the
battery.
1.
Press the [SRC] button.
2.
The illumination and display on the unit light
up. The unit automatically remembers its last
Operation mode and will automatically switch
to display that mode.
3.
Press and hold the [SRC] button for 1 second
or longer to turn off the power for the unit.
Selecting a
mode
1.
Press the [SRC] button to change the Opera-
tion mode.
2.
Each time you press the [SRC] button, the Op-
eration mode changes
in
the following order:
Radio
mode
-+ CD/MP3JWMA mode -+
AUX
mode
-+ Radio mode
...
Note:
If the CD mode is selected when no disc
is
inserted,
the display shows "NO DISC".
Switching
the
display
Press the [D] button to select the desired display.
Each time you press the [D] button, the display
switches
in
the following order:
Radi.o
mode
Main Display -+ Clock Display -+ Main Display
...
CD
mode
Main Display (Track No., Play Time)-+
Clock
Display -+ Main Display...
MP3IWMA mode
Main-1 Display (Track No., Play Time)-+
Main-2 Display (Folder No., Play Time) -+
Track -+ Folder -+Title -+ Album -+
Artist
-+
Clock Display -+ Main-1 Display...
AUX mode
Main Display -+Clock Display -+ Main Display
...
* Once selected, the preferred display becomes the
display default. When a function adjustment such
as volume is made, the screen will momentarily
switch to that function's display, then revert back
to the preferred display several seconds after the
adjustment.
Adjusting
the
volume
Turning the [ROTARY] knob clockwise increases
the volume; turning it counterclockwise decreas-
es the volLime.
"VOL XX" will be displayed where
"XX" is the volume level from 0 (minimum) to
33
(maximum).
* The factory default setting for volume is
"VOL
13".
Sound
mode
adjustments
1. Press the [.1'] button to enterthe Sound Adjust-
ment mode.
2.
Press the [ ...... ,
~]
button to
select
the
"item name".
"Z-EHCR"
t
"BASS"
t
"TREBLE"
t
"BALANCE"
t
"FADER"
M275 9

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Clarion M275 and is the answer not in the manual?

Clarion M275 Specifications

General IconGeneral
BrandClarion
ModelM275
CategoryCar Receiver
LanguageEnglish

Related product manuals