To Next PageTo Next PageWhat to do if my Clarion M502 Car Receiver unit resets itself when the engine is off?
If your unit resets when the engine is off, there may be an incorrect connection between the ACC and the Battery. Check the wiring and correct it.
How to improve the Bluetooth audio quality on my Clarion M502?
If the audio quality is poor after connecting a Bluetooth device, the internal microphone gain might not be set correctly, or the external microphone might not be positioned properly. Adjust the gain and position of the external microphone. For example, stick the microphone onto the dashboard so it is close to the driver. Also, adjust the gain of the internal microphone in System Setup.
Why can't I pair my Bluetooth device with my Clarion Car Receiver?
If you can't pair your Bluetooth device, it might not support the profiles required for the system, or the Bluetooth function might not be enabled. Try using another device to connect. Refer to the user manual of the device for how to enable the Bluetooth function.
How to fix Clarion Marine Equipment when it cannot pair with a Bluetooth device?
If you cannot pair your Bluetooth device with the Clarion Marine Equipment, it might be because the device does not support the profiles required for the system. In this case, try using another device to connect. Alternatively, the Bluetooth function of your device may not be enabled; refer to your device's user manual for instructions on how to enable it.
What to do if Clarion Marine Equipment unit won't power on and display is not accurate?
If your Clarion Marine Equipment unit won't power on, no buttons respond, and the display is inaccurate, the microprocessor may have malfunctioned due to noise. Turn off the power and press the [RESET] button with a thin rod. Note that pressing the [RESET] button will clear stored radio frequencies and titles.
Why is there no audio output from my Clarion M502?
Several factors could cause low or absent audio output. Check if the audio output connection is properly wired. Also, verify that the volume isn't set too low and increase it. Damaged speakers, heavily biased volume balance, or speaker wiring contacting metal parts of the car may also be responsible. Replace damaged speakers, adjust the channel balance to the center position, and insulate all speaker wiring connections.
What to do if my Clarion Car Receiver unit cannot power on?
If your unit doesn't power on, the unit fuse or car battery fuse may have blown. Replace the blown fuse with a new fuse that has the correct rating.
How to fix poor sound quality or distortion in my Clarion M502?
Poor sound quality or distortion can occur if the speaker power rating doesn't match the unit, if the connections are wrong, or if the speaker is shorted. Replace the speakers if their power rating is mismatched. Check the wiring and correct any wrong connections, and also check the wiring if the speaker is shorted.
What to do if my Clarion M502 doesn't recognize a USB device?
If your Clarion Car Receiver doesn't recognize a USB device, it might be damaged. Try disconnecting and reconnecting the USB device. If it's still not recognized, try a different USB device.
What to do if my Clarion M502 Car Receiver unit cannot power on and the display is not accurate?
If the Clarion Car Receiver unit cannot power on, nothing happens when buttons are pressed, and the display is not accurate, the microprocessor may have malfunctioned. Turn off the power and press the [RESET] button with a thin rod.
General| Bluetooth | Yes |
|---|---|
| USB Input | Yes |
| AUX Input | Yes |
| Pandora Control | Yes |
| iHeartRadio Control | Yes |
| HD Radio | No |
| Remote Control | Yes |
| Video Playback | No |
| Power Output | 50W x 4 |
| Tuner Type | AM/FM |
| Peak Output | 50W x 4 |
| Audio Formats | MP3/WMA |
Visual layout of the control panel and its components.
Identifies and explains the function of each button on the control panel.
Covers fundamental operations like power, volume, source selection, and display.
How to adjust the volume level of the audio system.
How to select and switch between different audio sources.
How to view and potentially set the system time display.
Procedure for resetting the unit to factory default settings.
How to display the SiriusXM Radio ID code for service activation.
Instructions for saving favorite SiriusXM channels to preset memory.
How to select stored channels using the preset memory.
Navigating and selecting channels by category for SiriusXM.
Scanning through preset SiriusXM channels to find a desired station.
Scanning channels within the currently selected SiriusXM category.
How to pause and resume playback of USB audio files.
Navigating to the next or previous track on a USB device.
Using fast forward and rewind functions for USB audio playback.
Selecting specific folders on a USB device to play MP3/WMA files.
Searching for specific tracks or folders within a USB device.
Resetting the USB player to the first track of the device.
Explains scan play, repeat play, and random play for USB devices.
Repeating the current track or all tracks from an iPod/iPhone.
Playing iPod/iPhone tracks in a random order.
Enabling direct control of the iPod/iPhone from the car unit.
Searching iPod menus and content alphabetically.
Adjusting the input sensitivity for AUX audio sources.
Steps to pair a mobile phone with the car's Bluetooth system.
How to initiate calls using Bluetooth phone features.
How to answer or reject incoming calls via Bluetooth.
How to stream audio wirelessly from a Bluetooth device.
Controlling audio playback from a Bluetooth device.
Navigating between tracks during Bluetooth audio streaming.
Troubleshooting common issues related to power, buttons, display, and audio output.
Troubleshooting problems specific to USB device connection and playback.
Lists error codes and their corresponding causes and measures.
Preparations and safety precautions before installing the unit.
Lists all items included in the product package.
Important general safety and handling precautions during installation.
Specific warnings and guidelines related to the installation process.
Step-by-step instructions for physically installing the main unit.
Steps to remove the trim ring from the unit.
Instructions for connecting external accessories like amplifiers and tuners.
