iPod
&
iPhone Operations
Repeat
play
This function
allows
you to play the current
track repeatedly or play
all
tracks
in
your
iPod/
iPhone
repeatedly.
1.
Press
the
[APT]
button
on
the
remote
control
once
or
more
until
"APT
ON"
appears
on
the LCD to perform repeat play.
2.
Press
[APT]
button
on
the remote control
repeatedly until "APT
OFF"
appears
on
the
LCD to cancel repeat playback.
Random
play
This function allows
you to play
all tracks
in
a
random order.
1.
Press
the
(ROM]
button
on
the
remote
control once or more until "
ROM
ALBUM"
appears
on
the
LCD
for
album
random play.
2.
Press
the
[ROM]
button
on the
remote
control once or more until "ROM
SONG"
appears on the LCD
to
perform random
play.
3.
Press
the
[ROM]
button
on
the
remote
control
once
or
more
until
"ROM
OFF"
appears
on
the
LCD
to
cancel
random
playback.
Setting
iPod
simple
control
mode
Use
this
function
if
you
wish
to
operate
through your
iPod
connected to this unit via
the
USB
cable.
*
The factory
default
setting
is
• OFF •.
1.
Press
and
hold [CONTROL]
knob (center),
and rotate the
[CONTROL]
knob choose
ADJUST,
then press the
[CONTROL]
knob
(center) to enter system setup.
2
Press the
[CONTROL] knob (left
I right) to
select
"
S-CTRL".
3. Rotate the
[CONTROL]
knob to
select
•
ON"
or
"
OFF " .
•
ON: Operations are made through your
iPod.
• OFF: Operations cannot be made through
your
iPod.
Notes:
•
When performing iPod operations using
simple control mode, make the operations
12
M502
slowly.
If
repetitive operations are performed
too quickly, unforeseen errors may occur.
•
When
performing
iPod
operations
using
simple control mode, please do not operate
the
iPod
and
the
unit
at
the
same
time
,
otherwise there may be unexpected event
happened.
•
Some
iPod
models
do
not
support
this
function. Consult your nearest Clarion dealer
or website to confirm which
models
do not
support this function.
iPod menu alphabet search
This function searches the subfolders for desired
alphabetical letters.
1.
Press the [CONTROL] knob (up), and rotate
[CONTROL]
knob
to
select the iPod menu
mode.
2.
Rotate
the
[CONTROL]
knob
to
switch
between categories.
MUSIC: PLAYLISTS, ARTISTS, ALBUMS,
GENRES, SONGS, COMPOSERS
VIDEO:
MOVIES
,
MUSIC
VIDEOS,
TV
SHOWS VIDEO PODCASTS, RENTALS
3.
Press
the
[CONTROL] knob. (The contents of
the category are displayed.)
4.
Press and hold the
[CONTROL]
knob (down).
5.
Rotate the
[CONTROL]
knob to
select
the
desired letter to search.
6.
Press
the
[CONTROL]
knob
(down)
to
perform search.
7. Rated the
[CONTROL]
knob
to
select
and
press the
[CONTROL)
knob to confirm.
Listening to PANDORA
You
can
listen
to
Pandora
internet
radio
by
connecting an
iPod/iPhone
that has
Pandora
Application already
inStalled.
To start streaming, connect the iPod/iPhone with
Pandora
already launched.
When
the
unit
displays
"PLEASE
LAUNCH
PANDORA
APPLICATION
ON
MOBILE
DEVICE"
in
PANDORA mode, please launch the
PANDORA Application by operating the iPod/
iPhone connected.
'
iPod
&
iPhone Operations
1.
Press
the
[CONTROL]
knob
(push)
to
enter the Pandora
mode.
Selecting
a
station
from
list
Press the [CONTROL] knob (up) to enter the
station list.
Rotate the [CONTROL] knob to select
"BY
DATE" or "A-Z" and press the [CONTROL]
knob to confirm.
•
BY DATE: List
in
an
created date order
• A-Z:
List
in
an
alphabetical order
Go
to
next
station
or
previous
statlon(an
alphabetical order)
Press the
[CONTROL]
knob (right)
on
the
panel
or
[
~]
button
on
the remote control
to
go to next station.
Press
the [CONTROL] knob (lift)
on
the panel
or
[
1+11]
button
on
the panel
or
remote control
to go to previous station.
Thumbs
up/down
1.
Press
the
[ADM]
button on
the
remote
control for the thumbs
up.
2.
Press the
[SCN]
button
on
the
remote
control for the thumbs down.
Notes:
• You
can
personalize
your
stations
by
"thumbs up"
or
"thumbs down".
• Pandora limits the number of thumbs down
allowed
on
their service.
If
you
attempt
to
thumbs
down
songs
beyond the
lim
it,
the current song continues
to playback.
AUX
Operations
Press the [CONTROL] knob
on
the panel or
[SAC/<!>]
button
on
the remote control once or
more to select
"AUX".
AUX is
just
for audio
content
with 3.5mm
Jack connector plugged into audio-in socket
on
the front panel
on
the right of
USB
slot.
AUX
Input
sensitivity setting
1.
Press and hold the [CONTROL] knob .
BOOKMARK
artist
or
song
Press
the [APT ] buton
on
the remote control to
Bookmark artist.
Prsee
and
hold
the [APT ] button
on
the remote
control to Bookmark current artist of the song.
Creating
new
stations
Press the [1] button
on
the remote control to create
a new station from the current artist.
Press and hold the [1] button
on
the remote control
to
create a new track.
Note:
If
the name of the station you wish to create for
a track title or
an
artist name
is
the same as the
station
name
currently
playing,
"NOW
PLAY"
appears
on
the display and the station
will not
be
created.
Skip
Press
the
[BAND/TOP]
button
on
the
remote
control for the next song
in
station.
Note:
• Pandora limits the number of skips
allowed
on
their service.
If
you attempt to skip songs
beyond the limit,
"SKIP
LIMJr
is
displayed.
Play/Pause
Press the [CONTROL] knob (down)
on
the panel
or
press [
.,..
..
] button
on
the remote
control.
2.
Turn the
[CONTROL]
knob to
select
"
AUX
SENS".
3.
If
the output level of connected external audio
player
is
"HIGH
",
rotate the [CONTROL] knob
and choose "LOW". And
if
the output level is
"LOW", choose "HIGH".
To Next Page
Loading...
