SiriusXM Satallite Radio Operations
Displaying the Identification (/D)
Code
Before you listen to satellite radio, you must
subscribe
to the service using
the
SiriusXM
Radio
ID number.
1.
Press the [CONTROL] knob on the front
panel or [SRC
I
<!>]
button
on
the remote
control to activate SiriusXM-mode.
2.
Press the [CONTROL] knob (left/right) to
select channel
"0".
The unit displays Radio
10.
Notes:
1.
The Radio ID
is
located on the bottom of
the SiriusXM Connect
Vehicle Tuner.
2.
Please note that the SiriusXM Radio ID
does not include the letters
I,
0,
S or
F.
3.
Activate the SiriusXM Connect Vehicle
Tuner using one of the two methods below:
• Online:
Go to "www.siriusxm.com/
activatenow" and choose
ACTIVATE
RADIO.
•
Phone: Caii1-800-XM-RADIO (1-800-967-
2346).
Storing
Channel Presets
1.
Press
[BAND/TOP] button
on
the remote
control
or
long-press
[CONTROL]
knob
(up) on the front panel to select the desired
band you want to store the preset
in.
There are 3 Satellite Radio Preset bands.
Each press of [BAND/TOP] button on the
remote
control or long-press [CONTROL]
(up)
on
the front panel changes the band:
SXM1
-> SXM2 -> SXM3 -> SXM1
2.
Tune
to
the
desired
channel
and
then
press
and hold one of the preset buttons
(1
through
6)
on
the remote control to store
the
channel.
3.
Repeat the procedure to store
up
to 5 other
channels
on
to the same band.
Note:
• A total of 18 channels can be stored
in
the
preset memory, 6
channels for each band
(SXM1 ,SXM2 and SXM3).
Tuning Channels using Presets
1.
Press [BAND/TOP]
on
the remote control or
long-press [CONTROL] knob (up)
on
the front
panel
to
select the desired
band
of Presets
you wish to access.
2.
Press
[CONTROL]
knob
(up/down)
to
the
preset
buttons
(1
through 6)
that
has
your
desired
Satellite
Radio
channel
stored
in
memory.
Category Browsing
1.
Press
and
hold
[CONTROL]
knob
(center
long press), and rotate the [CONTROL] knob
to
choose
"ADJUST",
then
to
choose
the
"SEARCH", and rotate [CONTROL] knob to
select
UCAT
MODE SELECT" to activate the
Category Browsing mode.
2.
Rotate [CONTROL] knob to
select
desired
category.
3.
Press [CONTROL] knob (left/right) to select
desired channel within the selected
Category.
You can see
channel name, channel number,
artist,
title or content by pressing [DISP] on
the remote
control.
4.
Press (CONTROL] knob to tune to selected
channel.
Note:
• If no operation is performed for 10
seconds
or press [CONTROL] knob (up), the Category
Browsing mode is
canceled.
Preset scan
Preset
scan
receives
the
stations
stored
in
preset memory
in
order. This function is useful
when searching for a desired station
in
memory.
1.
Press
and
hold
the
[PS/AS] button on
the
remote control.
2.
When a desired station is tuned
in,
press the
[PS/AS] button
on
the remote control again to
continue receiving that station.
Channel scan {In current category)
Channel scan receives the channel
(in current
category)
in
order. This function is useful when
searching
for
a
desired
channel
in
current
category.
SiriusXM Satallite Radio Operations
1.
Press
the
[PS/AS] button on the remote
control.
2.
When a desired channel is tuned in, press
the [PS/AS] button
on
the remote control
again to continue receiving that channel.
Note:
• Be careful not to press and hold the
[PS/AS] button on the remote
control for
1
second
or longer, otherwise the preset
scan function
will begin and the unit starts
scaning presets.
Artist
& Song Alerts
While listening
to SiriusXM Satellite Radio,
you can be
alerted when your favorite songs
or artists are
playing
on
other channels. The
radio
will display an Alert message when a
matching artist or song is found on another
channel. Then you can choose if you want to
tune to that favorite or you can ignore it and
stay
on
your
current
channel. Information
on setting up the Artist and
Song
alerts
is
described
below.
1.
While
listening
to
favorite
song,
short-
press [RPT] button on the remote control
to add the artist or long-press
[RPn on the
remote
control button to add the song to
the "Artist
& Song Alerts" list.
Press and hold [CONTROL] knob (center
long press), and rotate
the
[CONTROL]
knob to choose ADJUST, then to choose
the
SEARCH,
and
rotate
[CONTROL]
knob to select "ALERT LIST".
Rotate
and
press
[CONTROL]
knob
to
select desired alert item. Then select
UON"
to activate alert,
"OFF"
to deactivate or
"DELETE" to delete this item. (press and
hold
[CONTROL]
knob)
You
can
also
activate and deactivate Alert function
in
System Setup menu.
Notes:
• You
can
store
up to
50
items
for
Artist
&
Song
Alerts.
"XU(sed)/YE(mpty)"
is
displayed when the new item
.is
stored. X
is the
total number of song titles or artist
names stored
in
memory, and Y is the total
number memory locations still available for
storage.
• If
either
the
artists
or
song
title
is
not
available,
"NO
SONG"
or
"NO
ARTIST" will
be displayed.
• If
you try to store item when memory is full,
"MEMORY FULL" is displayed. If you want
to
store
another,
please
delete
exsisting
alert item.
Receiving and Tuning to
an
Alert
Whenever
a
stored
artist or
song
is
playing
on
another
channel,
alert
message
"ART
ALERT"or "SNG ALERT" appears on the unit
display.To tune to artist or song identified by
the
alert, press [ROM] button on
the
remote
control.
Notes:
•
If
no
operationg
is
performed
for
5
seconds,the unit returns to
normal mode.
• Artist
name
and Song title which you have
stored and which are
currently playing will
be displayed
in
category called
"MY
MUSIC"
in
search mode.
My Music search
You
can
access
the
channels
which
is
broadcasting the contents
in
the activated Alert
list.
1.
Press
and
hold
[CONTROL] knob (center
long press), and rotate the [CONTROL] knob
to
choose
ADJUST,
then
to
choose
the
SEARCH, and rotate [CONTROL] knob to
select
"MY
MUSIC LIST".
2.
Press [CONTROL] knob to display matched
songs which are
currently broadcacsted
3.
Rotate [CONTROL] knob to
select
desired
song, and press [CONTROL] to tune to that
channel.
Note:
• If there
is
no matched songs broadcasted, it
displays
"MEM
EMPTY".
Rep lay function
The
Rep
lay
feature
allows
you
to
pause,
rewind,
and
replay
up to 30
minutes
of live
SiriusXM Satellite Radio.
M502
9
To Next Page
Loading...
Need help?
General
