2.3.4 Manipulating the map
Tap the map anywhere to browse it during navigation. The map stops following the current
position (the Vehimarker, a blue arrow by default, is not locked in a fix position on the screen
any more) and control buttons appear to help you modify the map view.
map with
drag&drop
You can
move the map in any direction: tap and hold
the map, and move your finger towards the direction you
want to move the map.
and out
,
Changes how much of the map is displayed on the
screen.
Clarion Mobile Map uses high-
let you examine the map at various zoom levels, always
with optimised cont
ent. It always displays street names
and other text with the same font size, never upside-
down, and you only see the streets and objects that you
need.
Map scaling has a limit in 3D map view mode. If you
zoom out further, the map switches to 2D view mode.
Tap the button once to modify the view in large steps, or
tap and hold the button to modify it continuously and
smoothly.
down
,
Changes the vertical view angle of the map in 3D mode.
Tap the button once to modify the view in large steps, or
tap and hold the button to modify it continuously and
smoothly.
and right
,
Changes the horizontal view angle of the map.
Tap the button once to modify the view in large steps, or
tap and hold the button to modify it continuously and
smoothly.
,
Tap this button to switch between the 3D perspective
and 2D top-down map view modes.
2D map view
mode
,
The direction of the compass shows North. Tap the
button to switch to North-
up view, and then tap again to
rotate the map in the previous direction.
3D map view
mode
,
The direction of the compass
button to switch to North-
up view, and then tap again to
rotate the map in the previous direction.
20 NX504E English
To Next Page
Loading...
Need help?
General
Weight and Dimensions
