Clarion VRX765VD - About the 2-ZONE function; Radio Operations

31
VRX765VD
280-8358-00
English
Owner’s manual
Radio Operations
Listening to the radio
1. Press the [SRC] button, and touch the
[TUNER] key.
The TUNER mode screen is displayed.
2. Press the [BAND] button or touch the [Band]
key to select the radio band. Each time the
button is pressed, the radio reception band
changes in the following order:
FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1...
3. Press the [R] or [F] button to tune in the
previous or next preset station.
Seek tuning
1. Press the [BAND] button or touch the [Band]
key to select the desired band (FM or AM).
2. If “MANU” is displayed at the bottom of the
display, keep pressing the [BAND] button
more than 1 second.
“MANU” in the display goes off, and seek
tuning is now available.
* The same operation is available by using the
[Band] key.
3. Touch the [X] or [x] key to automatically
seek a station.
• When touching the [x] key, the station is
sought in the direction of higher
frequencies.
• When touching the [X] key, the station is
sought in the direction of lower frequencies.
Selecting stations by entering
frequency
This function displays the Key Pad on the screen
allowing you to tune by entering a frequency.
1. Press the [BAND] button or touch the [Band]
key to select the desired band (FM or AM).
2. Touch the [Search] key to display the Key
Pad screen.
3. Touch the [0]~[9] key corresponding with the
frequency you desired. When you input the
wrong number, touch the [CLR] key to delete
the last input number.
4. Touch the [ENT] key to tune in to the entered
frequency.
5. Touch the [Back] key.
Manual tuning
There are 2 ways available: Quick tuning and
step tuning.
When you are in the step tuning mode, the
frequency changes one step at a time. In quick
tuning mode, you can quickly tune the desired
frequency.
1. Press the [BAND] button or touch the [Band]
key to select the desired band (FM or AM).
2. If “MANU” is not displayed at the bottom of the
display, keep pressing the [BAND] button
more than 1 second.
“MANU” appears in the display, and manual
tuning is now available.
* The same operation is available by using the
[Band] key.
3. Tune into a station.
Quick tuning :
Touch and hold the [X] or [x] key for more
than 1 second to tune in a station.
Step tuning:
Touch the [X] or [x] key to manually tune in
a station.
Eng.book 31 ページ ２００５年１２月２７日 火曜日 午後１１時３６分