Satellite Radio Operations
58
VRX765VD
English
Owner’s manual
280-8358-00
Presetting a category
A category can be preset by registering specific
categories in Category Preset keys 1 to 6. Then
the desired category can be recalled by pressing
the corresponding Category Preset keys.
1. Touch the [CAT] key.
2. Touch the [v] or [V] key to scroll the category
list.
3. Touch the Category item key you wish to
store in memory.
4. Touch the [List] key to display the Preset
Category screen.
5. Touch and hold the desired Category Preset
key for more than 2 seconds to store the
currently selected category to that Category
Preset key.
Note:
• When the name of a channel stored in memory is
changed by a broadcast station, the display may
show a channel name that differs from the stored
name.
• A channel stored in memory may be discontinued
at the option of the broadcast station.
Scan function
There are two scan modes: the category scan
mode and the preset scan mode.
During scanning channels are displayed in
abbreviated form, the display mode cannot be
switched.
● Category scanning
In a category scan, broadcast channels in the
same category as the current channel are
selected about every 10 seconds.
1. Touch the [List] key.
2. Touch the [PS] key.
• The category scanning can also be
performed by touching the [CS] key in the
Preset Category screen.
Note:
• Category scanning is not available when no
category is defined for the current channel.
● Preset scan
A preset scan scans the channels (up to 18
channels) stored in the preset memory about
every 10 seconds.
1. Touch the [List] key.
2. Touch and hold the [PS] key for more than 1
second.
Eng.book 58 ページ ２００５年１２月２７日 火曜日 午後１１時３６分
To Next Page
Loading...
