5.1 ch Surround Decoder Operations
62
VRX765VD
English
Owner’s manual
280-8358-00
Selecting the Dolby PL II (Dolby Pro
Logic II ) type
* The factory default setting is “OFF”.
* This setting is disabled when both the CENTER
SP and SURROUND SP items of the SPEAKER
SEL setting are set to “OFF”.
1. Press the [ADJ] button, and touch the
[AUDIO] key.
2. Touch the []] key of the Dolby PL II item.
3. Touch the key for the desirable type to select.
4. Touch the [Back] key to return to the previous
screen.
Output adjustment of subwoofer
volume, center volume and balance/
fader
1. Press the [ADJ] button, and touch the
[AUDIO] key.
2. Touch the []] key of the DETAIL item to
display the submenu.
3. Perform the following adjustments:
● Subwoofer volume adjustment
● Center volume adjustment
● Balance/Fader adjustment
3-1. Touch the [[] or []] key of the
SUBWOOFER VOL item to adjust to
desirable level (Setting range : –6 to 3).
* The factory default setting is “0”.
3-1. Touch the [[] or []] key of the CENTER VOL
item to adjust to desirable level (Setting
range : –6 to 0).
* The factory default is “0”.
3-1. Touch the []] key of the BAL/FAD item.
Touch the [{] or [}] key to adjust the fader
level.
[{] key :
emphasized the sound from the front
speakers.
[}] key :
emphasized the sound from the rear
speakers.
3-2. Touch the [[] or []] key to adjust the balance
level.
[[] key :
emphasized the sound from the left
speakers.
[]] key :
emphasized the sound from the right
speakers.
4. Touch the [Back] key to return to the
previous screen.
Eng.book 62 ページ ２００５年１２月２７日 火曜日 午後１１時３６分
To Next Page
Loading...
