G'!I1·}f";J:
Settings
:8
Ejt>-.:t
6:"<:1<
\!·df';)
Au11(o
R.llln'_l
1
2 3
OK
A0~11(l11rl!
Oth(,>fS
4
5 6
C!,';II
MOl1tlor
7 8
9 0
~.1"lIl
A(l"u:;.t
10
UO
A'\.1
Adjusting
the
clock
1. Touch the
[Settings]
key. The Settings
menu will be displayed.
2.
Touch the
[Clock]
key in
General
sub
menu.
3. Set up the time
by
touching the digital
numbers on the screen. After inputting the
time, you can choose AM
or
PM if the Clock
Mode
is set
to
12
Hr.
Basic
Op_e_ra_t_io_n_s
_
Adjusting
the
EQ
The
Bass gain and Bass frequency can
be
adjusted as follows.
1.
Touch [ - ] or [ + ] key
to
set the
desirable level.
2.
To
set the Bass center frequency, enter
the Audio adjustment
in
the Settings
menu.
3.
To
set the Bass Q-Factor, enter the Audio
Adjustment
in
the Settings menu.
The
EQ
can be adjusted as follows.
1.
Touch the [...] or
[~]
key
to
select your
settings.
2.
To
set your preferable setting, select User.
3. Select from preset setting list:
Flat, Jazz,
Pop
or Classical.
Adjusting the
Bass
Adjusting
the Treble
4.
Touch the
[Clock
Mode]
to
change time
settings
to
12Hr
or
24Hr.
The Treble gain and Treble frequency can
be adjusted as follows.
1. Touch [ - ] or [
+ ] key
to
set the desirable
level.
2.
To
set the Treble center frequency, enter
the Audio adjustment in the Settings menu.
Adjusting
the
Balance/Fader
The Balance
or
Fader can be adjusted as
follows.
1.
Touch the [R]
or
[F) key
to
adjust
to
the
fader level.
• The factory default setting is
"0".
(Adjustment range: front 9
to
rear -9)
2.
Touch the
[Left]
or
[Right]
key to adjust
to
the balance level.
• The factory default setting is
"0".
(Adjustment range: left -9
to
right 9).
Reset
to
Factory
Defaults
1. Touch the
[Settings]
key. The Settings
menu will be displayed.
2. Touch the
[Others]
key.
3. Touch the
[Reset]
key.
Select [YES]
to
restore your unit
to
factory
default settings. This function will erase all
memory from the unit and you must reset all
personalized items such as tuner presets.
NOTE:
•
You
will be asked once to confirm
if
you want
to use the default setting.
The
unit will close
the panel automatically.
Adjusting the
Subwoofer
The
Subwoofer can be adjusted as follows.
1.
Touch the [ - ]
or
[ + ] key
to
adjust
to
the subwoofer level.
• The factory default setting is
"0".
(Adjustment range: left
-9
to
right 9).
Adjusting the
Loudness
The
Loudness can be adjusted as follows.
1.
Touch the [... ] or [
~]
key
to
turn loudness
On
or Off.
VX401NZ401 19
To Next Page
Loading...
Need help?
General
