How to fix Clarion VX316AU Car Video System when it won't turn on?
If your Clarion Car Video System isn't powering on, the fuse may be blown. Replace it with a fuse of the same amperage. If it blows again, consult your store of purchase. Also, check for incorrect wiring and consult your installation center if needed.
What to do if the Clarion VX316AU Car Video System remote control is not working?
If the remote control for your Clarion Car Video System isn't working, it could be due to direct sunlight interfering with the light-receptive part of the unit. Also, check the remote control's battery to ensure it is not dead or missing.
Why are video images not displayed on my Clarion Car Video System?
If video images are not showing on your Clarion Car Video System, ensure that the parking brake is engaged.
What to do if my Clarion VX316AU Car Video System doesn't recognize the USB device?
If your Clarion Car Video System isn't recognizing the USB device, disconnect the USB device and reconnect. If the device is still not recognized, try replacing with a different USB device. Also check if connectors are loose.
What to do if Clarion VX316AU disc cannot be loaded?
If your Clarion Car Video System won't load a disc, first ensure that there isn't already a disc loaded and eject it before loading the new one. Also, check the disc slot for any foreign matter and remove it, or consult a service station.
What to do if Clarion VX316AU Car Video System buttons aren't working?
If nothing happens when you press the buttons on your Clarion Car Video System and the display is inaccurate, the microprocessor may have malfunctioned. Press the reset button with a thin rod. Note that this will clear stored radio frequencies and titles.
Why does my Clarion VX316AU sound skip or is noisy?
If the sound from your Clarion Car Video System skips or is noisy, the disc may be dirty. Clean the disc with a soft cloth. Alternatively, the disc may be heavily scratched or warped, in which case you should replace it with a disc in good condition.
What to do if USB device cannot be inserted into Clarion VX316AU?
If you can't insert a USB device into your Clarion Car Video System, it may be because the USB device has been inserted with wrong direction. Reversing the connection direction of the USB device, try it again. Also, the USB connector might be broken, in which case you should replace it with a new USB device.
Why does my Clarion Car Video System sound bad when first turned on?
If the sound quality of your Clarion Car Video System is poor immediately after turning it on, condensation may have formed on the internal lens. Let it dry for about 1 hour with the power on.
Why is there no sound on my Clarion Car Video System when 'NO FILE' is displayed?
If you see 'NO FILE' displayed on your Clarion Car Video System and hear no sound, it means there are no MP3/WMA files stored in the USB device. Store these files properly in the USB device.
General| Display Size | 6.2 inches |
|---|---|
| Resolution | 800 x 480 pixels |
| Screen Type | LCD |
| Touchscreen | Yes |
| Bluetooth | Yes |
| USB Port | Yes |
| DVD Player | Yes |
| Audio Formats Supported | MP3, WMA |
| RCA Video Outputs | 1 |
| AUX Input | Yes |
| Navigation | No |
| Rear View Camera Input | Yes |
| Steering Wheel Control Ready | Yes |
| AM/FM Tuner | Yes |
| Remote Control | Yes |
| Dimensions | 178 mm x 100 mm x 165 mm |
| Video Formats Supported | DivX |
| Maximum Power | 50W x 4 channels |
To Next Page
