Clarion VX316AU - SETTINGS OPERATIONS; Accessing the Settings Menu; Audio Adjustment Settings

VX316AU 37
English
English
Owner’s Manual
20. SETTINGS OPERATIONS
Select Settings
1. Press the button on the Home Screen. The display will
change accordingly.
2. The audio of the current mode can be heard in the back-
ground. Audio volume will still be adjustable.
3. Press one of the top buttons to select a specic setting
category.
4. Press the button to exit Settings and return to the pre-
vious mode.
1. Return Button
2. Balance/Fader Tab
3. Time Alignment Tab
4. Sound Effect and Subwoofer Tab
5. Graphic Equalizer Tab
6. Clock Adjustment Tab
7. General Settings Tab
8. About Tab
9. Adjustment Display. Differs with each adjustment cat-
egory
Balance/Fader Adjustment
Press the button in the top menu to select the Balance/
Fader tab. The display will change accordingly.
Adjusting the Balance
1. The adjustment range for balance is L12 to R12.
2. Press the button to emphasize the sound from the right
speakers.
3. Press the button to emphasize the sound from the left
speakers.
4. Press the button to reset the balance to “CENTER”.
Adjusting the Fader
1. The adjustment range for balance is R12 to F12.
2. Pressing the button emphasizes the sound from the
front speakers.
3. Pressing the button emphasizes the sound from the
rear speakers.
4. Press the button to reset the fader to “CENTER”.
Note:
This feature is not available in Phone mode.
Time Alignment Adjustment
1) Previous Preset
2) Next Preset
3) Reset Button
4) Increase Delay Button
5) Decrease Delay Button
1. Press the button in the top menu to select the Time
Alignment tab. The display will change accordingly.
Note:
The time alignment is adjustable for all four speakers with a range
0 – 10 milliseconds for each speaker, and 0 – 20 milliseconds (ms)
in total across all speakers.
A total of 2 custom categories (Custom 1, Custom 2) are available for
adjustment.
2. Press the / buttons at the Preset area to select
the desired category.
3. Press the button to increase the time delay from a
speaker by 0.05 milliseconds (ms).
4. Press the button to decrease the time delay from a
speaker by 0.05 milliseconds (ms).
5. Press the button to reset the time alignment on all
speakers to “0”.
Note:
This feature is not available in Phone mode.
876431
9
2 5
1
6
2
45
3
1. Left Button
2. Right Button
3. Center Buttons
4. Front Button
5. Pointer Display
6. Rear Button
1 2
45
3