VX316AU 45
English
22. ERROR DISPLAY
Display Cause Measure
LOAD ERROR A disc is caught inside the CD
deck and is not ejected.
This is a failure of CD deck’s
mechanism.
Consult your nearest service
dealers.
DISC ERROR A disc cannot be played due to
scratches, etc.
Replace with a non-scratched,
non-warped-disc.
A disc is loaded upside-down
inside the CD deck and does
not play.
Eject the disc then reload it
properly.
NO FILE No supported le in the CD Use a CD with les.
CURRENT FILE NOT
SUPPORTED
An unsupported le is being
played on the head unit.
Use a CD with supported le
formats.
REGION CODE ERROR DVD is not support in your
country.
Use a CD with correct region
code.
DEVICE ERROR The connected device is not
supported.
If the device is frozen, disconnect
it, and reconnect it again.
Connect a proper device.
An error occurred when
controlling the device.
Disconnect the device, and
reconnect it again.
The device is connected via the
USB Hub.
Disconnect the device, and
reconnect directly to the
connector of this unit without
using the USB Hub.
OVER CURRENT Over-current or data error is
detected.
Turn off the ignition switch,
disconnect the device, restart the
engine and reconnect it again. If
the device is still not recognized,
try replacing with a different
device.
NO FILE No les in the device. Use a device with les.
CURRENT FILE NOT
SUPPORTED
An unsupported le is being
played on the head unit.
Use a device with supported le
formats.
NO BLUETOOTH DEVICE A2DP is not connected to the
unit.
Disconnect and reconnect the
device to the unit.
NO VIDEO SIGNAL DVB-T2 receiver is not
connected to the unit.
Video input is not connected to
the unit.
HDMI input is not connected to
the unit.
Connect the receiver/input to
the unit.
DVD/CD MP3/WMA/AACUSB/MTP/iPod Devices
Bluetooth
Audio
DVB-T2
Video input/HDMI
To Next Page
Loading...
