Radio
Op.=;.e:..:ra::.::t::.::io::.,:n.:.:s::...-
_
Listening
to
the
Radio
Recalling
a
preset
station
1.
Touch the desired Band key
to
select the
band you wish to store in.
2. Tune in the station you wish
to
store using the
seek tuning, manual tuning,
or
preset tuning.
3.
Touch and hold the desired Preset key you
wish
to
store the current station for more than
2 seconds.
Auto
Store
There are 2 ways to recall the preset station.
• Using the tuner unit:
1.
Touch the
[BAND]
key
to
select the
desire band
(FM
or
AM) on the tuner.
2. Touch the
[List]
key to display the Preset
List screen.
3. Touch the preset station
(1
to
12)
on tuner
display.
4.
Touch [
..
]
or
[ T ]
to
select next station
up or down the preset list.
5.
Touch the [PS] button
to
begin scanning
the preset stations.
• Using the remote control:
1.
Touch the [BAND] button
to
select the
desire band
(FM
or
AM) on the remote
control.
2.
Touch the preset number
(1
to
12) on
numeric pad.
Manual
memory
6 - List key
7 - Seek Down key
8 - Seek
Up
key
9 - Eject key
10 - Main Menu key
11
- Tuner display
1 - Band key
2 - Scan key
3 - Tune
Up
key
4 - Tune Down key
5 - Audio Settings
key
Seek Tuning
1.
Touch the [Tuner] key on the Main menu
display. The tuner mode screen is displayed.
2.
Touch the [BAND] key
or
touch the [BAND]
button on remote control to select the radio
band. Each time the button is pressed, the
radio reception band changes in the following
order: FM1, FM2, FM3, AM,
FM1
...
1.
Touch the
[BAND]
key to select the radio
band
(FM
or AM).
2. Touch the
[~
] or
[s!.
]key
to
automatically seek a station.
• When touching the [
A ]
key,
the station is
Seek
sought in the direction
of
higher frequencies.
• When touching the [
s!k
]
key,
the station is
sought
in
the direction
of
lower frequencies.
Manual
Tuning
1.
Touch the [BAND] key
to
select the radio
band
(FM
or
AM).
2.
Touch the
[M~J
or
[M!.k] key
to
manually seek a station.
• When touching the [
A ]
key,
the station is
M-Seek
tuned
in
the direction
of
higher frequencies.
• When touching the
[M%.k]
key, the station is
tuned
in
the direction
of
lower frequencies.
The Auto Store is a function for storing up to 12
stations that are automatically tuned in
sequentially. If 12 receivable stations cannot be
received, a previously stored station remains
unoverwritten at the memory position.
1.
Touch the
[Band]
key
to
select the desired
band.
(FM
or
AM)
2. Touch the
[Auto
Store]
key to start
the Auto Store function.
A beep sounds and the stations with good
reception are stored automatically
to
the
preset channels.
20 VX401
NZ40
1
To Next Page
Loading...
Need help?
General
