EasyManua.ls Logo

Clark GEX 30 - Page 54

Clark GEX 30
132 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GEX/GTX Operator Compartment 4-9
Section 4. Operator Compartment and Controls
Pump controller & Motor overheat warning indicator
lamp & ICON (For AC Only): This
indicator lamp is to warn
of conditions where the temperature of pump motor and
controller exceeds the limited value. If this lamp turns on,
pump motor output is reduce in half.
Pump motor warning code: "-207"
Pump controller warning code: "-203"
Drive controller & Motor overheat warning indicator
lamp & ICON (For AC Only): This
indicator lamp is to warn
of conditions where the temperature of drive motor and
controller exceeds the limited value. If this lamp turns on,
drive motor output is reduce in half.
Drive motor warning code: "-65"
Drive controller warning code: "61(Master), -140(Slave)"
Travel direction ICON (GEX/GTX): It is display on the
screen.
Battery discharge indicator (ECX): This
display shows the remaining charge in the
battery.
One segment will turn off with each 10%
reduction in charge. Warning Code: "66:BAT
LOW", it occurs at 10% remaining battery
charge.
B
lue color
Red color
Battery discharge indicator (GEX,GTX): It
displays the battery discharge condition of the
lift truck
.
The one bar indicates 10% charging condition. If
th
e battery is charged more than 20% (8 bars or
more), blue LED is displayed, but it is less than
20% (2 bars or less), red LED is displayed. If it is
less than 10% (1 bar), it will flicker and buzzer
sound.

Related product manuals