5-4 Starting from a Safe Condition
Section 5. Operating Procedures
Adjusting the Seat
Adjust the seat to a comfortable
position for you. Adjust the seat
by moving and holding the
release lever at the front under of
the seat. Put the seat in a
position that will provide easy
reach to all controls. Release the
seat lever. Make sure that the
seat locking mechanism is
engaged.
Never adjust the driver's seat while the truck is moving,
to avoid the possibility of loss of control and of personal
injury.
Buckling Up
Buckle up. Be sure that you put
on the seat belt. Connect and
adjust the seat belt strap to a
snug, comfortable position.
Adjusting the armrest of the driver's seat (OPTION)
• Loosen the armrest ajustment
clamping screw (1).
• Move the armrest (2) to the
desired position.
• Tighten the clamping screw (1)
again.
The clamping screw must be tight.
Back declining
Adjustment
Fore and Aft
Adjustment
2
1
To Next Page
Loading...
