Starting from a Safe Condition 5-5
Section 5. Operating Procedures
Starting the Truck
Before you start the truck, make sure that you have taken all the
above-mentioned precautions and that the directional control is in
NEUTRAL. To start the truck, turn the key switch clockwise to the ON
position.
Message display (Dash Display)
The model name, POWER
selection, travel direction,
warning and alarm message
are displayed.
In normal operating condition:
Model name/POWER/Travel
direction.
When several messages are
simultaneously displayed,
they will be displayed in the order of Alarm, Warning and Normal
condition.
If many alarm conditions have
simultaneously occurred, the priority
2 Alarms will be displayed. (The
priority means Alarm number)
Travel direction icon
It displays the traveling direction or angle of steering
wheel.
The direction icon rotates in 10 degree increments.
(Total 36 icon).
Alarm icon : When an error occurs this Alarm icon is
displayed to distinguish the condition easily. When
the alarm message is displayed, this icon is
simultaneously displayed.
BATTERY LOW
Normal
Er r o r
Warning
56 : FET SHORT
23 : FUSE ERROR
To Next Page
Loading...
