5-8 Starting from a Safe Condition
Section 5. Operating Procedures
Mini lever (Option)
1) Forward and Reverse switch
Switch for shifting between forward
and reverse.
− Forward............. Push forward
− Reverse............. Push backward
The speed of forward and backward
traveling can be adjusted by pressing
the accelerator pedal.
• Stop the vehicle before shifting between forward and
backward traveling.
• After the system has been activated, return the acceler-
ator pedal to their neutral positions and return to the
seat before recommencing operations.
• Always operate the control switch from a properly
seated position.
2) Lift lever
Raise and lower the forks for loading.
− Raise...................Pull backward
− Lower...................Push forward
Raising speed can be adjusted by the
extent of pulling the lift lever.
Lowering speed can be adjusted by
the extent of pushing the lift lever.
• After the system has been activated, return all of the
levers to their neutral positions and return to the seat
before recommencing operations.
• If you return to the seat while lowering the lift lever, the
forks will not descend due to the return to neutral func-
tion.
To Next Page
Loading...
