Starting from a Safe Condition 5-9
Section 5. Operating Procedures
3) Tilt lever
Tilt the mast forward and backward.
− Forward............. Push forward
− Backword.......... Pull backward
Forward or backward tilting speed can
be adjusted by the extent of operating
the lever.
• After the system has been activated, return the accelera-
tor pedal and all of the levers to their neutral positions
and return to the seat before recommencing operations.
4) Attachment lever
Operates the attachment.
Attachment speed can be adjusted by
the extent of operating the lever.
• After the system has been activated, return the acceler-
ator pedal and all of the levers to their neutral positions
and return to the seat position before recommencing
operations.
5) Clamp lever lock switch
This switch allows attachment lever
operations to be switched between the
3rd and 4th ways.
It is for 3rd or 4th clamp lever lock
option when clamp release is not
allowed, then pushing it with 3rd or 4th
lever
Operate the attachment lever switch when attachment
operations are stopped.
To Next Page
Loading...
