To Next Page
T
Terry ReidAug 1, 2025
What to do if Clarke CA30 17E has inadequate vacuum?
- LLeslie PhillipsAug 1, 2025
If your Clarke Scrubber has inadequate vacuum, several issues could be the cause. First, check if the recovery tank is full and drain it if necessary. Ensure the drain hose and squeegee hose are correctly connected. Inspect the float filter for blockages and clean it, checking the float itself. The squeegee might be dirty or the blade worn or damaged, so clean and inspect it. Lastly, verify that the recovery tank lid is properly sealed and that the seal/gasket isn't damaged; refit or replace as needed.
General
