8
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
PLANER SETUP
FITTING THE FENCE
1. Position the fence as shown.
2. Lock the fence in place using the
two hexagon screws supplied.
FENCE POSITION ADJUSTMENT
1. Move the fence position lock
downward to release the fence
2. Slide the fence to the required
position
3. Lift the fence position lock to fix
the fence in place.
WARNING: DISCONNECT MACHINE FROM POWER SOURCE BEFORE
MAKING ANY ADJUSTMENTS. FAILURE TO COMPLY MAY CAUSE SERIOUS
INJURY.
To Next Page
