12
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
CONNECTING ELECTRICAL DEVICES
The generator can supply both 230V AC and 12V DC
AC POWER
1. Start the engine. See page 10.
2. Make sure the appliance is turned
off before connecting it to the
generator.
3. Connect the appliance to the
generator.
VOLTMETER
The voltmeter will display the output
voltage of the generator during use.
NOTE: The output voltage may
drop if you place a heavy or
highly resistive load on the
generator.
CAUTION: MAKE SURE THAT THE APPLIANCE BEING CONNECTED IS IN
GOOD WORKING ORDER, IF IT BEGINS TO ACT ABNORMALLY OR STOPS
SUDDENLY, DISCONNECT IT FROM THE GENERATOR.
CAUTION: MAKE SURE THE APPLIANCE DOES NOT EXCEED THE MAXIMUM
RATED LOAD FOR THE GENERATOR.
CAUTION: ANY DEVICE WHICH CONTAINS AN INDUCTIVE LOAD E.G.
DEVICES THAT CONTAIN A MOTOR MAY REQUIRE MORE CURRENT ON
STARTUP.
CAUTION: Care should be taken when connecting sensitive devices
such as laptop computer and televisions to the generator.
A surge protection device is recommended when connecting these
types of device.
To Next Page
Loading...
Need help?
General
