To Next Page
Y
ylewisJul 26, 2025
What to do if my Clarke Air Compressor stops and will not start again?
- OOlivia MedinaJul 26, 2025
If your Clarke Air Compressor stops and won't restart, the issue might stem from bad electrical connections, a tripped overload cutout switch, or burnt-out motor windings. First, check and tighten all electrical connections. If that doesn't work, switch the compressor off, wait for 5 minutes, and then switch it back on. If the problem persists, you may need a replacement motor; contact your local Clarke dealer.
General
